where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Hi-Spec Systems
Hi-Spec Systems are an innovative, forward thinking and fast moving non-destructive testing (NDT) technology company who specialise in the design ...

309 views
Job Offers
G.Madhesan
Consultant, Welding ýnspector/QAQC inspector
CHENNAI UNIVERSITY, Turkey, Joined Nov 2004, 10

G.Madhesan

Consultant, Welding ýnspector/QAQC inspector
CHENNAI UNIVERSITY,
Turkey,
Joined Nov 2004
10
02:01 May-08-2007
Senior Welding/Painting Inspector

Job Location: Tunisia
offered by  

One of our contractor in Tunisia required a Senior welding/Painting Inspector for 4 to 6 months period of BG ASME code vessel job.Salary is not a concern for suitable candidates.
Requirments,
*Preferebly Engineering graduate with certification for welding/painting
*Well experience in ASME code vessel welding/painting inspections
*should be experience in preparation of Quality documents,PQRs/WPSs &ITPs and inspection reports
*Well experience in Radiographs interpretation & familiar in other NDT methods
*If required the inspector will be used for other projects also

If anybody seriously interested with above qualifications kindly send your CV.


    
 
 

Product Spotlight

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Research and Applications Development For NDT

The Research and Applications Development (RAD) group is a newly formed team within Acuren dedicat
...
ed to tackling challenging inspection problems. Our focus is the development of novel, field deployable, advanced inspection techniques for use in cases where standard NDT methods are ineffective. We don't wait for new innovations, we engineer them. From concept to commissioning.
>

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window