where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Materials Research Institute
Consulting to the NDT industry.
208 views
Job Offers
Jakub Walasek
Jakub Walasek
09:22 Jun-14-2007
Senior Inspector

Job Location: western europe
offered by  

COMPANY:is an international group with a core business of conformity assessment, applied in the areas of quality, health, safety, environment and social responsibility

RESPONSIBILITY:
Review of applicable contractual requirements (technical standards, specifications, etc).
Definition and review of Quality Plan and the relevant procedures
Review and validation of inspection assignment documentation (technical aspects, reference documentation, schedule, milestones, reporting, logistics, co-ordination procedure, etc)
Selection of the most appropriate inspection techniques
Execution or supervision of inspection according to predefined Quality Plan, and to the established inspection procedures / techniques
Execution of inspection reporting including treatment of non-conformities (NCR’s) and other applicable deliverables
Ensuring quality of inspection according to Quality System
Interpretation of results of inspections
Treatment of the NCR’s and the corrective actions
Review and appraisal of inspection procedures
Maintaining internal and external communication
Management of one or more inspectors
Design and delivery of training for inspectors
Promotes BV portfolio to clients
Respects security guidelines and safeguards personal security in the working environment
Actively participates in the sharing of knowledge and information (Knowledge management)
Continuous learning and developing in his area of responsibility

REQUIREMENTS:
(Advanced) Vocational training or equivalent qualification / experience
5-6 years of experience
Fully conversant with the key standards and inspection procedures for the concerned field (able to select most appropriate reference standard / inspection- criteria)
Acts as a recognised expert in the relevant area
Able to design and to deliver training modules
Able to verify and establish Quality Plan or Inspection Testing Plan
Able to manage one or more Junior Inspectors
PC Skills, Good English and local language skills


 
 

Product Spotlight

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

Silverwing RMS PA - Phased-array corrosion mapping

Eddyfi Technologies integrated two market leading solutions, Silverwing’s RMS and M2M’s instru
...
ments to provide a high-speed, remote access ultrasonic phased-array inspection system with live total focusing method (TFM).
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window