where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

274 views
Job Offers
Jakub Walasek
Jakub Walasek
09:23 Jun-14-2007
Junior Inspector

Posted by  
Job Location: western europe

COMPANY: is an international group with a core business of conformity assessment, applied in the areas of quality, health, safety, environment and social responsibility

RESPONSIBILITY:
Selection of the most appropriate inspection techniques
Execution of inspection according to predefined Quality Plan
Ensuring quality of inspection according to Quality System
Interpretation of results of inspections
Maintaining internal and external communication
Respects security guidelines of BV and safeguards personal security in the working environment
Actively participates in the sharing of knowledge and information (Knowledge management)
Continuous learning and developing in his area of responsibilit

REQUIREMENTS:
Vocational training or equivalent qualification / experience
Conversant with relevant inspection techniques
Able to carry out inspections according to pre-defined Quality Plan using established inspection procedures
Able to interpret inspection results
PC Skills
Good English and local language skills


 
 

Product Spotlight

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

Scatter Correction for Industrial Cone-Beam Computed Tomography (CBCT)

Download our white paper on Scatter Correction for Industrial Cone-Beam Computed Tomography (CBCT)
...
Using 3D VSHARP, a fast GPU-Based Linear Boltzmann Transport Equation Solver here: http://bit.ly/2Y0t78P
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window