where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

203 views
Job Offers
Jakub Walasek
Jakub Walasek
01:28 Jun-15-2007
Team Leader/Senior Mechanical/Electrical Verification Engineers

Job Location: Aberdeen
offered by  

Client:
Organisation: A global Oil & Gas Inspection firm with over 26,000 people working across 160 countries require experienced and ambitious professionals for established contracts covering offshore North Sea activity.

Accountabilities / Area of Activity:
You will carry out PFEER and DCR examinations onshore / offshore, tracking of progress, report writing, progress meetings, preparation of scopes, invoicing and project control. Leading other engineers and being contract holder. Shaping and developing the Verification Group through sharing of technical knowledge and continuous improvement of our services. Development and implementation of Verification schemes / Written Schemes of Examination, covering existing and new installations. Running of large projects covering technical and financial aspects of the contract.

Knowledge, skills, experience:
- Degree in Mechanical, Electrical or Oil & Gas Engineering,
- 2-5 years experience in a similar position.
- knowledgeable in industrycodes, standards and regulations and be prepared for offshore trips to conduct Inspection/verification examinations on all topside equipment.

If you are interested please send CV in English at: sol.pl@solutions-hrs.com


    
 
 

Product Spotlight

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window