where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

ZETEC, Inc.
Zetec is a global leader in nondestructive testing (NDT) solutions for the critical inspection needs of industries the world counts on every day, ...
482 views
Job Offers
David Hermanutz
Consultant,
Hbndt.com, China, Joined Jul 2012, 85

David Hermanutz

Consultant,
Hbndt.com,
China,
Joined Jul 2012
85
01:18 Jul-09-2007
NDT Instructor

Posted by  
Job Location: Calgary, Alberta

Non Destructive Testing (NDT) Instructor

Job Type: Full Time
Location: Calgary, AB, CANADA;
Job Category: Education, Skilled Trades
Industry: Technology
Year(s) of Experience: 5
Number Of Positions: 1
Date Posted: Jul 4, 2007

NON DESTRUCTIVE TESTING (NDT) INSTRUCTOR

SCHOOL OF Manufacturing & Automation
COMPETITION #: 386-06-MH

The School of Manufacturing & Automation at SAIT requires an individual to provide instructional services within the Non Destructive Testing (NDT) program. In addition, the incumbent will provide assistance in program development and planning as well as facilitate CGSB examinations.


RESPONSIBILITIES:

· Know, understand, apply and relate to students the essential facts, concepts, procedures and principles in areas of expertise designated by the curriculum, using a variety of instructional techniques, which promote learning and personal development.

· Create lesson plans, exams, quizzes and modules for student use

· Assist in the development of curriculum

· Show personal interest in the learner and create a climate conducive to optimal learning.

QUALIFICATIONS:

The successful applicant will have a minimum of 5 years recent NDT experience accompanied by the completion of Level II in MPI, LPI and RT. Preference will be given to candidates possessing all five current CGSB level 2 certificates (RT, UT, ET, MT, PT). Additional trade certifications, degrees, metallurgical/materials training and familiarity with ASME and CSA codes would be an asset. Previous experience in teaching or program development would be beneficial.

NOTE: This is a full time salaried position to June 30, 2008 with a possibility of extension.

OPEN TO: SAIT Employees and the Public

SALARY: Commensurate with education and experience plus excellent benefits

COMPETITION #: 386-06-MH

CLOSING: This position will remain open until suitable candidates have been found

TO APPLY: If you meet the requirements of this position and wish to apply, please continue with this on-line application. SAIT is committed to Employment Equity and invites applications from all qualified individuals.

NOTE: The preferred method of application is on-line. Notification of receipt will only be made to on-line applicants. Candidates selected for interview will be contacted within 28 days. By applying your resume may be considered for other opportunities at SAIT that suit your experience.

SAIT's vision is sharply focused – to be recognized as Canada's premier polytechnic, one of the world's finest, setting the standard in education, training and innovation.

Freedom of Information and Protection of Privacy (FOIP)
The personal information recorded on the application form is being collected under the authority of the Post Secondary Learning Act and Section 33c of the Freedom of Information and Protection of Privacy (FOIP) Act. The information will be used for purpose(s) of employee payroll and administration and is protected by the privacy provisions of the Freedom of Information and Protection of Privacy (FOIP) Act. If you require additional information concerning the collection and use of this personal information, please contact the FOIP Coordinator in Human Resources at 284-8633.


 
 

Product Spotlight

A1525 SOLO

A1525 Solo – the most compact and affordable TMF unit with two phased array transducers and 3D v
...
isualization and analysis software in standard delivery set. A compact, ergonomic and easy to handheld Phased Array unit based on Total Focusing Method for easy-going imaging of inspection objects with two-dimensional and three-dimensional visualization and evaluation of inspection results.
>

Echomac® PA Bar Tester

The Echomac® PA BT provides 100% inspection of round bars for core and surface defects, at speeds u
...
p to 2 m/sec, depending on the specific application. The unit allows producers to handle a much larger range of diameters in one installation, and is available in 3 models to test 10 – 75mm diameter (small model); 20 – 130mm (medium model) or 50 – 254mm (large model) bars.
>

Varex Imaging Large Field of View (FOV) Digital Detector Arrays (DDAs)

A larger FOV DDA can reduce the space and volume of the X-ray inspection system on the factory floor
...
, enable faster scanning times, better throughput and better resolution images at a lower dose. Customers can also save time and money. With these benefits in mind, Varex Imaging has designed a family of large FOV detectors (4343HE, XRD 1611, 4343DX-I, 4343CT) for our industrial imaging customers.
>

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window