Job Location: Canada
Excellent NDT opportunity in the aerospace industry.
Experienced UT Level I and II NDT Inspector required for leading Aerospace Manufacturer. Excellent rates, guaranteed overtime, hotel paid, food allowance provided and travel paid to and from site at the start and completion of the project.
Terms of Employment: Temporary, Full Time, Overtime, Weekend, Day, Night, Evening
Salary: To be negotiated
Anticipated Start Date: As soon as possible
Education: Completion of college/CEGEP/vocational or technical training
Credentials (certificates, licences, memberships, courses, etc.): Nondestructive Testing Certificate, NRCAN Certification Ultrasonic testing Level 1, NRCAN Certification Ultrasonic testing Level 2
Experience: 1 - 2 years
Languages: Speak English, Read English, Write English
Testing Equipment and Methods: Ultrasonic, Nondestructive tests
Type of Work Experience: Aircraft/aerospace manufacturing preferred.
Specific Skills: Conduct tests to ensure quality or detect defects, Calibrate, test and interpret ultrasonic equipment
Essential Skills: Reading text
IntraPhase Athena Phased Array System
The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
Aerospace Systems - Automated Ultrasonic Inspection
USL are specialists in the design and manufacture of turnkey
ultrasonic inspection systems for aer
ospace applications. From
monolithic composites to complex honeycomb structures. This video
shows just a few examples of what is possible, find out more at:
NDT, RESEARCH AND DEVELOPMENT OF NEW METHODOLOGY, TRAINING CENTER
I&T NARDON INSTITUTE was idiated
in 1988 by Giuseppe Nardoni, now
president and owner of the company, based on his multi-annual and
international experience in the field of NDT.
UCI Hardness Tester NOVOTEST T-U2
UCI hardness tester NOVOTEST T-U2 is is used for non-destructive
hardness testing of:
alloys by scales of hardness: Rockwell (HRC), Brinell
(HB), Vickers (HV);
non-ferrous metals, alloys of iron etc., and using five additional
scales for calibration;
with tensile strength (Rm) scale determines the tensile strength
of carbon steel pearlitic products by automatic recalculation from
Brinell (HB) hardness scale.