where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Hi-Spec Systems
we are specialised in the design, development and manufacture of Phased Array and Time-of-Flight Diffraction (ToFD) ultrasonic inspection systems.
307 views
Job Seeks
Dmitry
Dmitry
04:04 Jul-28-2007
NDT - gaz, main pipelines

Job Location: Russia, anywhere

The resume.
The certificated expert (Body of accreditation -
Profsertiko, Minsk, Byelorussia) in the field of not destroying control
(NDT - Non destructive testing) searches for work in your organization.
Specialization - the main
pipelines (gas - oil pipelines). I have certificates by 4 kinds :1.
X-ray graf - 2-nd level (RT) 2. The ultrasonic control - 2-nd level (UT)
- certificates .3. The visual control - 2-nd level (VT). 4. The
capillary control . LEVEL RT 2-nd sectors - the main pipelines,
industrial power. Levels UT and VT - in 1-st sector - the main
pipelines.
Operational experience: I work in Open Society "Beltransgas"",
management "Belgasenergo", laboratory NDT the engineering center - 2,5
years . I perform works on quality assurance of welded connections and
diagnostics of a body of a pipe of the main pipelines (gas mains),
stations, AGNKS, compressor stations methods RT, UT (the ultrasonic
control ), VT etc. In a various range of thickness and diameters under
specifications and technical documentation or the customer. (ÂÑÍ012-88,
ÐÒÌ-2004)
Performed works: search and acknowledgement of the declared defects
after intratrumpet diagnostics ) on gas-transport system of Byelorussia
Yamal-Europe, etc., and also on gas mains taps Minsk-Gomel,
Minsk-Grodno, etc. Direct participation in repair work on elimination of
defects of the specified gas mains as responsible for performance and
the control of repair work over laboratory NDT.
Quality assurance of welded connections of gas mains (îáâÿçêà)
compressors at compressor station the Jamal-Europe with the reporting to
the inspector of the technical control of the Russian Federation.
Participation in elimination of failures.
Devices and installations: RT- Arina - 02,-5., Gammarid - 192, ERESCO
MF, etc. UT - UD2 - 70, UD4 - T(tomografic).
Participation and development of new technics at magnetization pipes at
repair work.
The expert of republican competition of welders 2006.
The age of 25 years, is responsible, executive, without bad habits,
physically
healthy, morally steady. The marital status - single. Has ended the
Belorussian-Russian university Mogilyov on a speciality " Devices and
methods of
NDT - Non destructive testing of materials and products".
I search for highly paid work on a speciality, in adjacent areas or any
- watch, long-term watch,
platforms a-shelf, heavy working conditions and etc.

P.S.
On specificity of work I am often in business trips. Therefore to
long-term business trips it is ready. Conditions of a payment approach.
From its part I guarantee responsible performance of works in not
dependences on conditions.
I possess an initial level of English language. Earlier English was
above a level, but because of absence of practice in informal
conversation has lost skill. In case of the positive answer of you, I
undertake to lift in the shortest terms a level of English, on how many
it is possible, with the tutor.

I can consider other variants.



 
 

Product Spotlight

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

HD-CR 35 NDT Computed Radiography System

Portable high-resolution CR scanner for all radiography applications - weld testing, profile images
...
and aerospace. No matter what type of radiographic testing you are performing, the unique TreFoc Technology of the HD-CR 35 NDT imaging plate scanner always guarantees the highest image quality.
>

MIZ®-21C: Truly Affordable Eddy Current Handheld with Surface Array Capability

Introducing MIZ-21C, the first truly affordable handheld eddy current instrument with surface array
...
capabilities. MIZ-21C can deliver fast, accurate inspections in demanding NDT applications including aerospace, oil and gas, manufacturing, and power generation. The surface array solution can reduce inspection time by up to 95% compared to traditional handheld pencil probes. The ergonomic design, long battery life, and intuitive touchscreen mean you can inspect more areas faster than ever without fatigue.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window