where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

ACS-Solutions GmbH
develop and manufacture hi-tech devices for Ultrasonic Testing

179 views
Job Offers
John D.
John D.
07:55 Aug-14-2007
ASNT Level III (RT, UT, MT, PT, VT)

Job Location: Houston, TX
offered by  

METCO is currently accepting applications and resumes’ for a full-time ASNT Level III in RT, UT, MT, PT, VT (Additional Level III certifications a bonus).

Candidates must have a minimum of 8 years of experience in the oil and gas industry, with significant experience as a trainer/teacher. Bachelor’s degree is preferred.

Duties will include but not limited to Provide Training, Certification of Personnel, Procedure Development, 3rd Party Witness, Auditing of Personnel, etc. with some travel involved.

METCO offers a competitive salary with benefits such as medical, dental, 401k plan, paid vacation, continuous training and relocation assistance to qualified candidates.

Please forward all resumes/applications with the header of “ASNT Level III” to John Dinwiddie at:
Fax: 713-827-7854
E-mail: John.Dinwiddie@metco-ndt.com or MetcoHR@metco-ndt.com

Additional Contact information for John:
Office: 713-465-4113 extension 215
Mobile: 713-202-4691

Check out the METCO website at www.metco-ndt.com.


    
 
 

Product Spotlight

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window