where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

163 views
Job Offers
Q-Tech Inspection Services
Consultant
India, Joined Sep 2007, 3

Q-Tech Inspection Services

Consultant
India,
Joined Sep 2007
3
02:50 Sep-15-2007
QC Inspector Welding / Coating

Job Location: India
offered by  

Our client require some welding & coating inspectors for offshore project in India. Good day rate will be provided in $ US.


    
 
 

Product Spotlight

NozzleScan: Radial nozzle scanner with probe skew

NozzleScan is a versatile manual scanning solution developed for the inspection of nozzle welds in
...
both set-through and set-on configurations. Available in both two-axis and three-axis instrument configurations and adaptable to cover a wide range of 90-degree nozzle sizes, from 3" upwards, on ferritic and austenitic materials.The transducer skew axis can also be adjusted, encoded and locked.
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window
s