where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1913 views
Technical Discussions
Chris Coughlin
Chris Coughlin
00:42 Feb-21-2001
Low Frequency UT Pulser/Receiver Board

Does anyone know of a low frequency (100 kHz to 500 kHz) ultrasonic pulser/receiver PC plug-in board on the market?

Thanks in advance,
Chris


    
 
 Reply 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 278

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
278
00:26 Feb-22-2001
Re: Low Frequency UT Pulser/Receiver Board
Try Physical Acoustics Princeton New Jersey www.pacndt.com. They had a PAC-IPR-90 Boards which went down to 100 Khz.


    
 
 Reply 
 
Wolfgang Hillger
Engineering
Ing.Büro/DLR, Germany, Joined Nov 1998, 5

Wolfgang Hillger

Engineering
Ing.Büro/DLR,
Germany,
Joined Nov 1998
5
09:14 Feb-22-2001
Re: Low Frequency UT Pulser/Receiver Board
: Does anyone know of a low frequency (100 kHz to 500 kHz) ultrasonic pulser/receiver PC plug-in board on the market?
.
: Thanks in advance,
: Chris
.
Dear Chris,
our pulser/receiver PC-board HILL-SCAN 3041 with a frequency range from <1 kHz to 10 MHz (-3 dB) is optimized for low frequency applications. Please find a description on our hompage www.Dr-Hillger.de.
For low frequency ultrasonic testing, a rectangular or burst transmitter provides about 12 dB higher amplitudes than a common spike pulser. Such a transmitter on a PC-board is our HILL-SCAN 3100.




    
 
 Reply 
 
Rolf D. on behalf of Dr. Hillger
Engineering
Ing.Büro/DLR, Germany, Joined Nov 1998, 5

Rolf D. on behalf of Dr. Hillger

Engineering
Ing.Büro/DLR,
Germany,
Joined Nov 1998
5
09:49 Feb-22-2001
Re: Low Frequency UT Pulser/Receiver Board
Please use for Forum Posts the email address of your Profile
or update your profile accordingly.

Rolf Diederichs

: : Does anyone know of a low frequency (100 kHz to 500 kHz) ultrasonic pulser/receiver PC plug-in board on the market?
: .
: : Thanks in advance,
: : Chris
: .
: Dear Chris,
: our pulser/receiver PC-board HILL-SCAN 3041 with a frequency range from <1 kHz to 10 MHz (-3 dB) is optimized for low frequency applications. Please find a description on our hompage www.Dr-Hillger.de.
: For low frequency ultrasonic testing, a rectangular or burst transmitter provides about 12 dB higher amplitudes than a common spike pulser. Such a transmitter on a PC-board is our HILL-SCAN 3100.
:
.



    
 
 Reply 
 
Michael H. Dalichow
Michael H. Dalichow
00:53 Feb-22-2001
Re: Low Frequency UT Pulser/Receiver Board
Dear Chris:
Quality Network, Inc. (QNET) offers pulser/receiver and A/DC boards for various applications. The standard frequency range of 500kHz to 20MHz can be complimented with optional frequency filters ranging from 20kHz to 27MHz, and we can provide you with virtually any brad or narrow band filter within this range. For more information please logon to http://www.qnetworld.com/ultrasonic_testing/pcus_11.html.
I you have any questions please send email or call (973) 726-8399.
Sincerely, Michael


    
 
 Reply 
 
Wieslaw Bicz
Wieslaw Bicz
00:59 Feb-22-2001
Re: Low Frequency UT Pulser/Receiver Board
: Does anyone know of a low frequency (100 kHz to 500 kHz) ultrasonic pulser/receiver PC plug-in board on the market?
.
: Thanks in advance,
: Chris
.
We can offer you such board (with PCI connector and external pulser, that can be adapted to your needs).

Wieslaw Bicz



    
 
 Reply 
 
Hanspeter Loertscher
Hanspeter Loertscher
00:38 Feb-23-2001
Re: Low Frequency UT Pulser/Receiver Board
: Does anyone know of a low frequency (100 kHz to 500 kHz) ultrasonic pulser/receiver PC plug-in board on the market?
.
: Thanks in advance,
: Chris
.
We at QMI can offer you a PCI card for ultrasonic testing in the frequency range of 30kHz to 1 MHz. The card is mounted in a metal case for shielding purposes and is used for multichannel systems. QMI recently installed an air-coupled ultrasonic scanning system using 8 of these cards. This system was presented at the WCNDT in Rome as paper idn209. See ndt.net.


    
 
 Reply 
 

Product Spotlight

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window