where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Sonotron NDT
Original developer and manufacturer of advanced ultrasonic instruments

418 views
Job Seeks
MAZHAR RAUF
MAZHAR RAUF
02:07 Oct-04-2007
Welding/Mechanical inspector

Job Location: Middle East

Dear sir,
I am sending my cv , Find here attached,
Please reply me soon.
MAZHAR RAUF
Mobile # 0092-3333631348
HJome # 0092-21-4243321

QA/QC INSPECTOR (MECHANICAL/WELDING)


MAZHAR RAUF A-1648 -Gulshan-e-Hadeed,Bin Qasim;
Phase II -Karachi 49-PAKISTAN
Email Id mrauuf@yahoo.com
Mobile No-0092-333-3631348
Res.Tel No-0092-21-4243321
----------------------------------------------------------------------------------------------------------------------------------

Education &Technical Qualification:

§ Diploma of Associate Engineer (Mechanical/Welding Technology)

§ Diploma of European Welding Inspection Practitioner (EWF)
§ Registered Welding Inspector- Number.2606 (TWI)

§ Certified Welding Inspector CSWIP-3.1 (Valid up to 2012)

§ Certified ASNT Level II in PT/MT/RT

§ Approved Welding/Mechanical Inspector from S.Aramco (SAP# 70005681)

In house Training/course-Jotun Paint(Pre-treatment and application)

Career Objective: Continuous learning and keeping abreast of latest technological developments.keeping track of the standard philosophies followed in various industries.To utilize my skills and strengths for the benefit of the employer.

Personal Detail:
Date of birth : 23/2/1958
Marital Status : Married
Nationality : Pakistani
Driving license : UAE (Dubai)
Professional Experience: More than 25 years experience in inspection of welding visual, dimensional, pressure component, piping, tanks & heavy structure(Bridges)
I have worked with several reputed construction companies in U.A.E, Qatar & Saudi Arabia.
Conversant with international code/standards like,ASME sec.IX, ASME sec.VIII, ASME sec.II, ASME B 31.3, API 1102, API 1104, API 650, API 620, API 653 & AWS D1.1.
Through knowledge in SMAW,GTAW,GMAW,FCAW,ESW,SAW and cutting related processes.
Page 1 of 3

Company : Olayan Descon Engineering Company K.S.A.

Project :Khursaniyah Producing Facilities.(Snamprogetti &S.Aramco)

Position : QA/QC Inspector (Mechanical &Welding) for tanks erection.(API 650 & 620)

Duration : August 2006 to August 2007

Company : Olayan Descon Engineering Company K.S.A.

Position :QA/QC Inspector (Mechanical &Welding)

Duration : October 2004 to 2005

Projects : Dahran Additional Facilities of Storage Tanks (S.Aramco)

Company : Olayan Descon Engineering Company K.S.A.

Position :QA/QC Inspector (Mechanical &Welding)

Duration : October 2002 to 2004 :> (WORK SHOP IN JUBAIL INDUSTRIAL CITY)

Responsibilities *Welding Inspection including weld fitup.
*Monitoring during welding verification of pre-heat/inter pass temp/heat in put etc.
*Stage inspection &Final inspection before PWHT or Hydro Test.
*Welder qualification as per ASME sec IX.
*Control of welding consumable.
*Monitoring welder performance.
*Compliance work with WPS.
*Dimensions Inspection.
*Evaluation of Test Results & reports.
*RT film interpretation.
*Co-ordination with Client & third party.
*Witness of NDE related activities.
*Development of new WPS.
*Documentation.

Company :Samsung Corporation Engineering Group

Position :QA/QC Inspector (Mechanical &Welding)

Duration :September 2000 to 2002

Project :Khuff Gas pipeline replacement project for QGPC-QATAR
Cross Country pipeline 36” dia 4Nos Stations – 2” dia to 30”dia.


Page 2 of 3
Company :Global NDE Services

Position : NDE Inspector.

Duration : 1999 to 2000

Responsibility : Welding and Radiographic inspection. :Cleveland Bridge & Engineering Pvt. Ltd.Dubai-UAE.

Position : QC Welding Inspector (Supervisor)

Duration : 1981 to 1998

Projects
· Ghazlan Desalination Plant (Saudi Arabia)
· Dubai Aluminum-DUBAL (Dubai)
· Jam Nagir Oil Field -Pile Cap (India)
· Lonto Higma Bridge (Hong Kong)
· Habco Power Plant (Pakistan)
· Dubai Gas Complex-DUGAS (Dubai)
· Ruwais Oil Refinery (Abu Dhabi)
· Sabia Power Station (Kuwait)
· Aluminum of Bahrain-ALBA (Bahrain)
· Khartoum Power Plant (Sudan)
· Sultan Qaboos Sea port (Sultanate of Oman)

Responsibilities
Ø Monitoring the capability of each welder on the basis of Radiographic Reports.
Ø Checking all welding activities is in compliance with the applicable code,standards and specification.
Ø Monitoring & witness of WPS/PQR /WQT/PT/MT/HT/PMI
Ø Co-ordination with Third party as well as client related to welding and NDE.
Ø Review of mill certificates,consumable MTC,calibration certificates of equipments.
Ø Checking that only approved electrode,wire and gas are used.
Ø Randomly checking welding parameters according to approved WPS(Ampere,voltage,Travel speed and Gas flow rate)
Ø Initiate DCR/NCR and following for correction as required.
Ø Checking the adequacy of the heat treatment technique and the record diagram.
Ø After completion of final testing, preparing all documents and submitting it to the Client.


Yours sincerely,
MAZHAR RAUF

Page 3 of 3


    
 
 

Product Spotlight

EKOSCAN Phased Array

In order to always fit your needs, EKOSCAN can manufacture any type of UT transducer, either convent
...
ional or Phased Array. As an ISO 9001: 2015 certified company, EKOSCAN is extremely careful as far a material selection and manufacturing processes are concerned. Our probes guarantee our customers the benefits of latest innovations regarding piezo-composite, backing, impedance adaptation layer, etc. Specific probes for hostile environment: high temperature, high pressure, corrosive environment,etc. Specific probes designed to fit your specific application: optimization of every parameter to guarantee you the best detection.
>

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Navic - Steerable Modular Automated Scanner

The Navic is a modular, motorized, steerable scanner designed to carry multiple attachments used
...
in various scanning and inspection applications. The Navic is capable of weld scanning (girth welds and long seam welds), automated corrosion mapping, and tank scanning.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window