where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Volume Graphics GmbH
By choosing Volume Graphics software, you can rely on more than 20 years of experience in the development of software for non-destructive testi ...
206 views
Job Offers
Applus RTD
Applus RTD
04:36 Nov-29-2007
Trainees with bachelor level background (mechanical / electrical engineering)

Posted by  
Job Location: Rotterdam (the Netherlands)

Applus RTD Project Services (PS) is engaged with Non Destructive Testing of objects like Pipelines, Tanks etc. These inspections are executed by advanced developed inspection systems. The activities are mainly executed world-wide.

In connection with middle management development we are looking for:


Enthusiastic HPE (Higher Professional Education) Trainees with technical background on bachelor level
(mechanical / electrical engineering)

Depending on interest you will be trained and educated on several positions such as: Operator, Supervisor, Project Manager.

The training period will take approximately 1,5 years and consist of a theoretical training combined with practical experience on international projects.

Are you interested?

For further information about contents of the function you can contact Frans Groos, +31(0)10 208 8 147, email: frans.groos@applusrtd.com.

Your written application, in which you announce your motivation you can aim to division Personnel & Organisation, attn. Ralph Meij, email: ralph.meij@applusrtd.com


 
 

Product Spotlight

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window