where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
209 views
Job Offers
Applus RTD
Applus RTD
04:50 Nov-29-2007
Project Manager

Job Location: Rotterdam (The Netherlands)
offered by  

Applus RTD Project Services (PS) is engaged with Non Destructive Testing on objects like Pipelines, Tanks etc. These inspections are executed by advanced developed inspection systems.
The activities are mainly executed world-wide.

Due to the active growth within the department there are vacancies for the position of:

Project Managers (Fulltime)


Description:

•First focal point for clients and technicians by execution of the
projects;
•Set up project execution plan for client;
•Development of technical procedures related to the project;
•Development of a Quality Plan related to the project;
•Requisition of specific personnel and equipment for assigned
projects in consultation with PS planning, Technical Services and
Innovation;
•Prepare and assist with calculation for the account department;
•Ensure safe custody and proper maintenance of equipment ;
•Ensure effective and efficient management of assigned and
approved projects;
•Ensure contract compliance;
•Ensure compliance with Corporate Policy & Procedures;
•Ensure world-class delivery and execution of assigned projects.


Knowledge and Skills:

•Candidates will have an electrical or mechanical background on
bachelor level
•Higher professional education in work and thinking;
•Executive capacity;
•Excellent interpersonal, communication and networking skills;
•Knowledge of NDT techniques and applications;
•Well grounded on Commercial and Marketing domain or willing to
take a course in this respect;
•Experience with the execution of world-wide industrial projects;
•Knowledge with integrity of installations;
•Fluent English and preferable German (spoken an written),
additional languages are a plus.

Are you interested?

For further information about contents of the function you can contact Frans Groos, +31 (0)10 208 8 147, email: frans.groos@applusrtd.com.

Your written application, in which you announce your motivation you can aim to divisionPersonnel & Organisation, attn. Ralph Meij, email: ralph.meij@applusrtd.com



 
 

Product Spotlight

XRHRobotStar

In high volume industries like automotive the requirement for a hundred percent X-ray inspection c
...
reates a bottleneck in the production. The XRHRobotStar is a fully Automated Defect Recognition (ADR) capable robot-system that allows an ultra-fast in-line inspection.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window