where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

233 views
Job Offers
Chris Meakin
Chris Meakin
06:13 Jan-22-2008
Project Manager / Engineer (Europe)

Job Location: Eindhoven, Netherlands
offered by  

Quest TruTec BV is currently seeking qualified individuals to apply for our Field Service Engineering positions working with our proprietary NDE technologies (i.e. Furnace Tube Inspection System (FTIS) / Laser Optic Tube Inspection (LOTIS) / External LOTIS Crawler / LaserVideo Coke Drum, etc.). Applying candidates will be responsible for traveling globally to various PetroChemical and Power plants to facilitate critical equipment inspections utilizing this equipment. Current positions open in our Eindhoven, Holland office

Job Duties
• Carry out destructive materials testing on failed plant equipment components
• Directly interface with customers on inspection status and findings
• Collect and analyzes inspection data
• Generate detailed field inspection reports
• Operate specialized NDE inspection equipment
• Maintain cleanliness and operability of NDE inspection equipment
• Perform component level troubleshooting and repairs on inspection equipment
• Pack and unpack sensitiveinspection equipment used on field projects

Position Requirements
• Current Level-II / III Ultrasonic (UT) certification with minimum of five (5) years experience.
• NDT Equipment Operation, Repair, Data Analysis, Report Generation Experience.
• Minimum two (2) years experience in the refinery industry
• Proficient with Microsoft Office Suite (Word, Excel & PowerPoint).
• Excellent people skills and be self-motivated, quick leaner, well organized, creative thinker, and possess strong leadership skills.

Working Conditions
• Must be capable and willing to travel domestically and internationally.
• Lift up to 50 pounds
• Work in oil/chemical refinery environment
• No fear of heights or confined spaces

Email resume to C.Meakin@QuestTruTec.com. No phone calls please


    
 
 

Product Spotlight

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

TVC awarded UKAS accreditation

TVC are delighted to finally announce we have been awarded UKAS accreditation for our calibration
...
laboratory. Laboratory accreditation to ISO/IEC 17025:2005 enables us to conduct the Electrical Verification of Ultrasonic Flaw Detection Equipment to BS EN 12668-1:2010. It has taken many months of hard work and we want to thank our staff for all their efforts during this massive undertaking.
>

I&T Nardoni

NDT, RESEARCH AND DEVELOPMENT OF NEW METHODOLOGY, TRAINING CENTER I&T NARDON INSTITUTE was idiated
...
in 1988 by Giuseppe Nardoni, now president and owner of the company, based on his multi-annual and international experience in the field of NDT.
>

Echomac® Small

Available with up to eight channels of electronics to detect and evaluate thickness, flaws and eccen
...
tricity, this UT tester is housed in a convenient, smaller cabinet. This instrument can be used in conjunction with bubbler or immersion tank systems, or with a test bench or in laboratory applications. The Echomac® Small is available in the FD4, FD6 or FD6A versions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window