where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Hillger Ing. Büro
was founded in 1984 and develops special ultrasonic imaging systems for high-tech materials.
640 views
Technical Discussions
Humberto rodriguez
Engineering, Inspection Coordinator
Venezuela, Joined Sep 2000, 2

Humberto rodriguez

Engineering, Inspection Coordinator
Venezuela,
Joined Sep 2000
2
03:36 Feb-27-2001
Lined or cladded Material Inspection

I would like to know your opinion on inspections techniques
for cladded or lined material in refinery services.
The objective is doing a non intrusive inspection.

Is it TOFD a good and accurate option ?.

Thanks in advance for your comments.

Humberto Rodriguez
Inspection Dept.
SINCOR Upgrader.




    
 
 Reply 
 
Ron Mahler
Ron Mahler
08:31 Mar-01-2001
Re: Cladded Material Inspection
We developed a clad ultrasonic gage especially useful for determination of local clad thickness and detection of lack of bonding between clad and substrate material using two independent channels. Suitable for metal plate, pipes and tubes with an inner clad layer. Parent material thickness from 4 mm. and clad thickness from 0.1 mm.

: I would like to know your opinion on inspections techniques
: for cladded or lined material in refinery services.
: The objective is doing a non intrusive inspection.
.
: Is it TOFD a good and accurate option ?.
.
: Thanks in advance for your comments.
.
: Humberto Rodriguez
: Inspection Dept.
: SINCOR Upgrader.
.



    
 
 Reply 
 

Product Spotlight

AMIGO2

TSC Amigo2 - ACFM technology has developed a solid reputation for accurately detecting and sizing
...
surface-breaking cracks through paint and coatings. As the industry demands increased performance in speed, signal quality, and portability, it’s time for an evolution. It’s time for Amigo2.
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

iProbe - USB Phased Array Probe

Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas
...
ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window