where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

LECOEUR ELECTRONIQUE
The Specialist of electronics for ultrasonic testing

260 views
Job Offers
Scott Richmond
Scott Richmond
06:09 Mar-31-2008
Level III FPI

Posted by  
Job Location: Crooksville, Ohio

Job Offer: Crooksville, Ohio (Columbus): FPI Level III or Experienced Level II

PCC Airfoils, LLC, headquartered in Greater Cleveland, Ohio, is a world leader in the fast-paced, high-tech industry of investment casting. Each of the eleven (11) Airfoils’ locations plays an integral part in the manufacture of blades, vanes and components for use in gas turbine engines. PCC’s parts are found on virtually all commercial & military aircraft, as well as, industrial gas turbine applications in the free world. Our product plays a significant role in NASA’s space program and aid in the evolution of the light-weight, fuel-efficient engines of the next generation.


The Airfoils Division is a wholly-owned subsidiary of Precision Castparts Corporation. The company currently has an overall sales volume of over $4 Billion, employing in excess of 18,000 individuals throughout 95 locations in the U.S. and worldwide. PCC is seeking individuals with high personal and professional standards who will thrive in a fast-paced, goal oriented work environment.


PCC Airfoils is seeking an FPI LEVEL III NDT candidate for the Crooksville, Ohio casting finishing facility. This facility employs over 250 non-union hourly and salaried employees. The Crooksville plant is located in rural central Ohio, approximately a one-hour drive from Columbus Ohio, the State capital. The Crooksville plant reports to the Minerva Ohio operation with total operation sales volume over $200 million; providing great opportunities for growth and upward mobility. It is also the sister plant to the Merida Mexico operation, allowing for the possibility of international business exposure.


General Responsibilities:

Reporting to the Crooksville Quality Manager this position is responsible to ensure compliance with PCC and customer penetrant requirements, train and test operators, identify, report and resolve any technical or production issues involving penetrant, and interpret codes, standards and contracts that control methods.


Specific Responsibilities:

Interface with Minerva and Merida Plants on technical and production issues.
Interface with customer representatives for relevant quality/technical issues.
Technical responsibility for Penetrant Operators and Processes.
Interpret codes, standards, and other contractual documents that control the methods to meet industry and customer requirements.
Prepare and implement Penetrant procedures and methods.
Develop, perform and maintain periodic system checks.
Conduct training and examination of NDT personnel.
Perform documented over inspection of Penetrant Level II personnel.
Maintain/achieve necessary accreditations including Nadcap, ISO, PCC, and Aerospace customers.
Qualifications:

Penetrant Level III certification, or min. 4yrs. experience Level II. Candidate must be prepared to IMMEDIATELY take, and pass, the Level III FPI tests both internally and those proctored by specific customers (Honeywell & PW).
College Degree or equivalent experience.
General knowledge of all NDT methods, experience in other methods a plus.
Experience with investment castings.
Knowledge of Pratt & Whitney, GE, and Snecma product a plus.


PCC Airfoils, LLC is an equal opportunity employer M/F/D/V

Please send resume and salary requirements to:
srichmond@pccair.com



 
 

Product Spotlight

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window