where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1738 views
Technical Discussions
Suresh S
R & D, Intelligent NDT Robotics Embedded Sytem Design
South Bank University, United Kingdom, Joined Aug 2002, 5

Suresh S

R & D, Intelligent NDT Robotics Embedded Sytem Design
South Bank University,
United Kingdom,
Joined Aug 2002
5
05:25 Feb-28-2001
Ultrasonic PC Card

I am looking for a PC Based UT Card (preferred Pulse-Echo) which can be used for analyzing the A/D data in a separate environment. Any help regarding PC Cards or External Cards which can be connected via RS232 should be greatly appreciated.

Thanks in advance

Suresh S



    
 
 
Wieslaw Bicz
Wieslaw Bicz
05:48 Feb-28-2001
Re: Ultrasonic PC Card

: I am looking for a PC Based UT Card (preferred Pulse-Echo) which can be used for analyzing the A/D data in a separate environment. Any help regarding PC Cards or External Cards which can be connected via RS232 should be greatly appreciated.
.
: Thanks in advance
.
: Suresh S
.
We can offer you such card. In about two or three weeks we will have a special interface, designed for connecting our PC UT card (http://www.optel.com.pl/manual/english/osc2.htm) via RS 232.

Please contact me, if you are interested.

W. Bicz
(W.Bicz@optel.com.pl)




    
 
 
Suresh S
R & D, Intelligent NDT Robotics Embedded Sytem Design
South Bank University, United Kingdom, Joined Aug 2002, 5

Suresh S

R & D, Intelligent NDT Robotics Embedded Sytem Design
South Bank University,
United Kingdom,
Joined Aug 2002
5
06:56 Feb-28-2001
Re: Ultrasonic PC Card
It looks very promising and I will contact you soon.
OPKUD-01/100 & OPGUD-01 together with the software
should be a complete pack. Should it be a complete pack, which can interface to computer via RS232? And how much it cost in pounds?

Thank you W. Bicz

Suresh S


: : I am looking for a PC Based UT Card (preferred Pulse-Echo) which can be used for analyzing the A/D data in a separate environment. Any help regarding PC Cards or External Cards which can be connected via RS232 should be greatly appreciated.
: .
: : Thanks in advance
: .
: : Suresh S
: .
: We can offer you such card. In about two or three weeks we will have a special interface, designed for connecting our PC UT card (http://www.optel.com.pl/manual/english/osc2.htm) via RS 232.
.
: Please contact me, if you are interested.
.
: W. Bicz
: (W.Bicz@optel.com.pl)
.



    
 
 
Wieslaw Bicz
Wieslaw Bicz
00:49 Feb-28-2001
Re: Ultrasonic PC Card
: It looks very promising and I will contact you soon.
: OPKUD-01/100 & OPGUD-01 together with the software
: should be a complete pack. Should it be a complete pack, which can interface to computer via RS232? And how much it cost in pounds?
.
We are working on this interface and a complete system. The system has a box with power supply,
card, and additional electronics, that has a processor (but not a very big one) and RS232 or RS485
interface. Processor is able to control the card and analyse the measurements, but not very quickly
(some measurements per second) and send the results via RS. It will be also possible to send the
whole RF information to PC.

The whole system will cost 2150 Euro (about 1350 Pound). You can order it immediately, it will be
ready in 3-4 weeks. We can also make adaptations to your needs.

Wieslaw Bicz




    
 
 
Tadeusz Stepinski
R & D
Uppsala University, Sweden, Joined Nov 1998, 14

Tadeusz Stepinski

R & D
Uppsala University,
Sweden,
Joined Nov 1998
14
01:24 Feb-28-2001
Re: Ultrasonic PC Card
An ultrasonic PC plug-in card Saphire from Lecoeur Electronics in Paris, France can solve your problem. It contains UT pulser, receiver and A/D converter (80 MHz 8bit). You can design your own applications using drivers for different programming languages or an advanced software Visual Saphire written in LabView.
We have used such boards for 5 years and have got a very good experience. You can get it as a separate small box that can be connected directly to your note book.
Regards

Tadeusz Stepinski
Uppsala University



    
 
 
Suresh S
R & D, Intelligent NDT Robotics Embedded Sytem Design
South Bank University, United Kingdom, Joined Aug 2002, 5

Suresh S

R & D, Intelligent NDT Robotics Embedded Sytem Design
South Bank University,
United Kingdom,
Joined Aug 2002
5
01:49 Feb-28-2001
Re: Ultrasonic PC Card
Has it RS232 terminal or RF which can be interfaced to Radio Moderms to communicate with Computer.
How fast it can send data?

Thanks

Suresh S

: An ultrasonic PC plug-in card Saphire from Lecoeur Electronics in Paris, France can solve your problem. It contains UT pulser, receiver and A/D converter (80 MHz 8bit). You can design your own applications using drivers for different programming languages or an advanced software Visual Saphire written in LabView.
: We have used such boards for 5 years and have got a very good experience. You can get it as a separate small box that can be connected directly to your note book.
: Regards
.
: Tadeusz Stepinski
: Uppsala University
.



    
 
 
Tadeusz Stepinski
R & D
Uppsala University, Sweden, Joined Nov 1998, 14

Tadeusz Stepinski

R & D
Uppsala University,
Sweden,
Joined Nov 1998
14
03:44 Mar-01-2001
Re: Ultrasonic PC Card
Saphir is a plug-in card which is mounted into a PC and connected to its BUS. The UT data are sent and in real time to the PC and presented at its screen. You can get an application taylored software in LabView.

As I mentioned, a stand alone version ONYX has been recently developed that can be connected to the computer (notebook) via ethernet.

Best regards

Tadeusz Stepinski

: Has it RS232 terminal or RF which can be interfaced to Radio Moderms to communicate with Computer.
: How fast it can send data?
.
: Thanks
.
: Suresh S
.
.
: : An ultrasonic PC plug-in card Saphire from Lecoeur Electronics in Paris, France can solve your problem. It contains UT pulser, receiver and A/D converter (80 MHz 8bit). You can design your own applications using drivers for different programming languages or an advanced software Visual Saphire written in LabView.
: : We have used such boards for 5 years and have got a very good experience. You can get it as a separate small box that can beconnected directly to your note book.
: : Regards
: .
: : Tadeusz Stepinski
: : Uppsala University
: .
.



    
 
 

Product Spotlight

TVC awarded UKAS accreditation

TVC are delighted to finally announce we have been awarded UKAS accreditation for our calibration
...
laboratory. Laboratory accreditation to ISO/IEC 17025:2005 enables us to conduct the Electrical Verification of Ultrasonic Flaw Detection Equipment to BS EN 12668-1:2010. It has taken many months of hard work and we want to thank our staff for all their efforts during this massive undertaking.
>

FlexoFORM™

The FlexoFORM™ solution integrates flexible phased array probe technology in a scanner to solv
...
e the challenges that come with inspecting pipe elbows. When combined with a water column, this solution can be used to collect easy-to-interpret data on elbows with diameters ranging from 4.5 in. OD up to flat and offers many benefits.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window