where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

298 views
Job Offers
Gabriel Teodorescu
Gabriel Teodorescu
07:38 Apr-08-2008
NDT specialist

Job Location: Baden, Switzerland
offered by  

Non-Destructive Testing Specialist (m/f) Rotating Equipment

Contribute your expertise in Nondestructive Testing (NDT) to our field service organization within the Power Service Sector, based in Baden Switzerland (AG).

Your Tasks: Perform NDT using ultrasonic and eddy current testing tools in the lab as well as at out customers’ sites worldwide. Interpret, document, and report test results. Assist in the preparation of the quality documentation and the calibration of tools. Provide feedback to engineering to improve NDT tools and methods.

Your profile: Good knowledge of turbine blade and coating material technology as well as in the area of materials investigation and testing. Ideally, knowledge in the field of high temperature materials. NDT level II or III certification in ultrasonic and eddy current testing or to be keen to learn these techniques. Experience in the development of ultrasonic and electromagnetic sensors systems of advantage. Field service experience would be an asset. Good command ofEnglish and basic German skills. Efficient working style. Communicative team player with the ability to deal with conflict and work under pressure. Willingness to travel extensively.

Please send your application to:

ALSTOM (Switzerland) Ltd,
Kerstin Huber, Human Resources CSXH,
Brown Boveri Strasse 7, CH-5401 Baden,
Phone: +41(0)562052035
e-mail: kerstin.huber@power.alstom.com

Join our 65 000 employees in over 70 countries by checking out our many vacancies worldwide:
www.careers.alstom.com


    
 
 

Product Spotlight

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window