where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

259 views
Job Offers
Oceaneering International Dubai
Inspection Services Provider : Company
Oceaneering International Dubai LLC, United Arab Emirates (UAE), Joined Aug 2008, 32

Oceaneering International Dubai

Inspection Services Provider : Company
Oceaneering International Dubai LLC,
United Arab Emirates (UAE),
Joined Aug 2008
32
09:44 May-26-2008
NDT Lev 3 Trainer

Job Location: Middle East (UAE)
offered by  

Oceaneering Inspection Division are looking for a NDT Lev III qualified Trainer and invite resumes from candidates interested to work in the Middle East (Abu Dhabi, UAE).

1) Candidates required with all the following qualifications listed below:
- ASNT Ultrasonics Testing Level 3 or Equivalent
- ASNT Radiography Testing Level 3 or Equivalent
- ASNT Magnetic Particle Testing Level 3 or Equivalent
- ASNT Penetrant Testing Level 3 or Equivalent

Candidates with the above qualifications and experience may forward current CV and valid certificate copies by email to recruit_inspection@oceaneering.com

Contact Details:
Dominic D’Almeida / Rajan Sebastian
Recruitment
Oceaneering - Inspection
UAE Tel. : +971-4-3117635
Aberdeen Tel. : +44-1224-758929
UAE Fax : +971-4-3317211
E-Mail: recruit_inspection@oceaneering.com


    
 
 

Product Spotlight

Aerospace Systems - Automated Ultrasonic Inspection

USL are specialists in the design and manufacture of turnkey ultrasonic inspection systems for aer
...
ospace applications. From monolithic composites to complex honeycomb structures. This video shows just a few examples of what is possible, find out more at: www.ultrasonic-sciences.co.uk
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

FlexoFORM™

The FlexoFORM™ solution integrates flexible phased array probe technology in a scanner to solv
...
e the challenges that come with inspecting pipe elbows. When combined with a water column, this solution can be used to collect easy-to-interpret data on elbows with diameters ranging from 4.5 in. OD up to flat and offers many benefits.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window