where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

225 views
Job Seeks
Judd Webster
Judd Webster
06:08 Jun-02-2008
Entry Level NDT Position

Job Location: United States

ADDRESS: 4280 Dewey Road
Bellingham WA, 98226
SSAN: (upon request)
PHONE: (360) 261-3725 cell
Marital Status: Single
EMAIL: WEBSTNATOR@YAHOO.COM

JUDD WEBSTER

OBJECTIVE: To gain employment with your company at the entry
Level of non-destructive testing. I intend to
Advance through hard work and dedication to be a
Valued and skilled employee of your company.


TECHNICAL The Ocean Corporation, Houston, TX
EDUCATION: November 26 - June 26, 2008

-- ASNT Level II Academic and Level I Practical in:

- Visual I, II, III and Leak Testing
- Penetrant Testing
- Magnetic Particle Testing
- Ultrasonic Testing
- Eddy Current Testing
- Radiographic Testing
- Radiation Safety (NRC 40-hour Course)
- Hazardous Material (USDOT 40-hour Course)
- Remotely Operated Vehicle/Automation (ROV)
- Rigging/Forklift Operation
- First Aid/CPR Card

-- ASNT Section, Houston, TX
May 3, 2008

- Ultrasonic Phased Array (8 hour class)


-- Bellingham Technical College, Bellingham, WA
January 1994 - December 1996

- Welding OA, SMAW, GMAW, GTAW (ALUM.,STL.)

-- Century Community and Technical College,
White Bear Lake, MN
January 2008 - March 2008

- Metallurgy

-- Association Of Bay Area Governments
Oakland, CA
December 2007

- First Responder Operations (8 hour course)


WORK
HISTORY: EC-NDT, Federal Way, WA
March 2007 - November 2007
Small Electronic Parts Assembler
(Eddy Current Probes and Cables)



Commercial Fisherman, Alaska
June 1999 - October 2002
Deck Hand

Dewey Valley Meat Company, Bellingham, WA
September 1987 - December 1999
Farm Butcher/Meat Cutter

REFERENCE: Available upon request

INTEREST: CWI, API 570, NACE, AUT, RT, Phased Array,
Manual Shear wave, Rope Access Inspection,
ROV, Cross Training,

MEMBERSHIPS: AWS Student Member
ASNT Student Member


COMMENTS: My GED test scores are higher than 80% of
Graduated high school seniors. My current GPA for
The Ocean Corporation is 95.05%. I can also type
24 words a minute with 100% accuracy and am
familiar with Microsoft Word and Excel , Plus I
have also applied for my TWIC card.


    
 
 

Product Spotlight

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window