Paint Coatings Inspector
Job Location: Anywhere
(619) 581-9137 firstname.lastname@example.org
NACE Coating Inspector Program,
Level 1 August 2008
Baccalaureate in Literature/Writing
University of California, San Diego, June 2003
Associates Degree in Liberal Arts
San Diego City College
Associates Degree in English
San Diego City College
Sprayer / Painter
San Diego, California
September 2006 to June 2007
Accomplishments: Prepared paint surfaces in hair salons and a barber shop; stripe coated edges, and rolled and sprayed surfaces as instructed.
Supervisor: David Naranjo
Deck Seaman, Paint King
United States Navy, USS Briscoe (DD-977)
December 1988 to September 1991
Accomplishments: Prepared steel surfaces to be painted with needle guns, wire brushes, chipping hammers, etc. Painted surfaces with brushes, rollers, spray rig, etc. As Paint King, head of the paint locker, mixed, stored, and issued paints, primers, thinners, rust inhibitors, and rust to metal converters to the entire ship. Also some experience with sand blasting, and supervised new hands to Deck Division.
Supervisors: BMC Steele, BMC Kevin LaFleur, BM2 Donald Hoyt, BM2 Vind, and BM2 Chris Eline
All contact information available upon request
IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.
Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
NDT Master Lecturer
In the program both university professors and practitioners will give lectures, which guarantees the
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
AIS229 - Multipurpose Real Time System
Latest standard & automatic real time
system developed by Balteau. The
AIS229 has been designed to
inspection in a wide variety of industry.
Composed of a shielded cabinet, 5
axis manipulator, x-ray generator and
tubehead from 160kV to 225kV, a fl at
panel & much more, the AIS229 is most
certainly one of the most multipurpose
RTR system available on the market.
SONOAIR - air-coupled Phased Array Ultrasonic Inspection System
For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
the scanning area and the system settings should be flexibly adapted to the test task and the material.
These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.