where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

191 views
Job Offers
Jenny
Jenny
02:01 Sep-11-2008
NDT Inspector

Job Location: Red Deer Alberta Canada
offered by  

The Red Flame NDT Inspector must be a CGSB Level-II in MT & UT and capable of performing the following routine inspection tasks.

The Red Flame NDT Inspector is Responsible for, but not limited to, the following:
�� Visual Inspection of Welding and Processes,
�� Nondestructive Testing of welds, during and after process completion,
�� Assisting in Inventory Control for NDT related Stuff,
�� Field Nondestructive Examination and Supervision,
�� Documenting daily inspection reports, and their subsequent submission to operations
office,
�� Routine re-viewing of Inspection Procedure and Acceptance Codes & Standards,
�� Competency Trainings,
�� Office Meetings, and attending NDT R&D Seminars,
�� Involving/assisting in all aspects of Job Preparations including, but not limited to,
employee/subcontract notifications, budget preparations inputs, shop maintenance,
manufacturing and R&D related tasks, as required,
�� Must be prepared/able for routine traveling outside Red Deer and sometimes, even
outside province on routine Red Flame Hot Tap Weld Inspections,


    
 
 

Product Spotlight

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

High Resolution Industrial CT System for Small/Medium Size Parts Inspection

The YXLON FF35 CT computed tomography system is designed to achieve extremely precise inspection res
...
ults for a wide range of applications. Available in a single or dual tube configuration, it is perfect for very small to medium size parts inspection in the automotive, electronics, aviation, and material science industries.
>

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

35 years of VOGT Ultrasonics!

This year we are celebrating a company anniversary! 35 years have passed since we first took our t
...
est device and swung the probe on behalf of safety. But our ultrasonic know-how goes back many years..
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window
s