where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
557 views
Job Seeks
UMAR HAYAT
NDT Inspector, ASNT NDT LEVEL-III (ID#187184) INSPECTOR/INSTRUCTOR
SNC LAVALIN, Eurovillage Compound, Office Al Khobar | Eastern Province | Saudi Arabia, Pakistan, Joined Nov 2008, 4

UMAR HAYAT

NDT Inspector, ASNT NDT LEVEL-III (ID#187184) INSPECTOR/INSTRUCTOR
SNC LAVALIN, Eurovillage Compound, Office Al Khobar | Eastern Province | Saudi Arabia,
Pakistan,
Joined Nov 2008
4
09:00 Nov-14-2008
NDT-PT,MT,RT,UT,Level-II Inspector/Instructor

Job Location: Middle East

Umar Hayat


Personal Information

• Name : Umar Hayat.
• Designation : NDT Inspector / Instructor.

Technical Qualification
• Diploma of Associate Engineering (DAE-Mechanical)

Professional Qualification

• Passed level 2 Magnetic Particle Inspection course.

• Passed level 2 Liquid Penetrant Inspection course.

• Passed level 2 Radiography Inspection Course.

• Passed level 2 Ultra Sonic Inspection Course.

Professional Experience

At present serving in the capacity of NDT Instructor/Inspector; where as Job Responsibilities are:

• Visual Inspection of equipment and Components.
• MPI and DPT Inspection.
• Electromagnetic Induction Inspection.
• Welding inspection with AC Yoke using Black and White contrast.
• Calibration of Black Lights, Ac Yoke’s, Magnetic Coil’s, and s, Light Meters, Ultrasonic Thickness Gauges
• Ultra Sonic testing of the components.
• RT Film interpretation.
• VTI-Weld inspection.
• Teaching and training of the NDT inspectors for different NDT Techniques.

Computer Skills

• MS Word
• MS Excel
• Internet & e-mail
Others

• Computer Literate
• Hands on Experience in In-service inspection
• Always ready for frequent / extensive traveling
• Ambitious, initiated and result oriented
• Have practiced Safety procedures
• Experienced in Quality assurance

Special.
• NDT instructor Since 1991 for VT,PT,MT,ET,RT,& UT.
• TOTAL NDT Inspection, teaching and training experience is 18 years.



umar


 
 

Product Spotlight

PROlineTOP Plug & Play Ultrasonic inspection device

As Plug & Play solution it units all control and operation elements in a small housing and therefo
...
re replaces the typical control cabinet...
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

AMIGO2

TSC Amigo2 - ACFM technology has developed a solid reputation for accurately detecting and sizing
...
surface-breaking cracks through paint and coatings. As the industry demands increased performance in speed, signal quality, and portability, it’s time for an evolution. It’s time for Amigo2.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window