The Largest Open Access Portal of Nondestructive Testing (NDT)

233 views Job Seeks Stephen Kidd Stephen Kidd 03:03 Jan-09-2009 NDT/Rope access Job Location: Worldwide Dear Sir/Madam, I am seeking work within the oil and gas sector onshore/offshore, worldwide. i have 4 years experience onshore/offshore uk/abroad IRATA 1 (200 hours) Level 2 PCN Ultrasonic Testing (3.1/3.2) Level 2 ASNT Magnetic Particle Inspection Level 2 ASNT Liquid Penetrant Inspection UK Offshore Survival UK Medical Full UK Drivers License Full UK Passport I am available for immediate start and would be grateful if you would contact me if you have any vacancies. Yours Sincerely, Stephen Kidd Tel: +44(0)7784923010 Email: kidd521@btinternet.com        Translate  Close   Product Spotlight UCI Hardness Tester NOVOTEST T-U2 StandNOVOTEST Ltd UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and ... alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale. > 5 Showcases5 Videos IntraPhase Athena Phased Array System StandWesDyne International (AMDATA Products) The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha ... sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION. > 9 Showcases ISAFE3 Intrinsically Safe Sensor System StandVallen-Systeme GmbH ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica ... l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A. > 2 Showcases FD800 Bench Top Flaw Detectors StandElcometer NDT The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater ... ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs. > 3 Showcases more Showcases Share... Home Exhibition Archive Forum Jobs Members Events Directory NDT A-Z Advertise Privacy Policy Contact About © NDT.net - Where expertise comes together. The Largest Open Access Portal of Nondestructive Testing (NDT)- since 1996 We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info Accept top this is debug window