where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Ultrasonic Sciences Ltd
We specialize in the design and manufacture of automated and semi-automated ultrasonic testing systems, including multi axis, multi channels systems and phased array electronics.
674 views
Technical Discussions
Richard D. Roberts
Engineering, Executive Managment
Quest Integrity Group, USA, Joined Nov 1998, 78

Richard D. Roberts

Engineering, Executive Managment
Quest Integrity Group,
USA,
Joined Nov 1998
78
07:05 Mar-22-2001
Has anyone heard of a "Laser Based" temperature measuring devise?

Dear Colleagues,

Has anyone heard of a “Laser Based” system capable of measuring temperature of tube surfaces with temperatures around 1000F? I know that there are several Infrared (IR) devises out there but the problem we have found with them is that the radiant heat severely sacrifices the results. I am looking for a system that is not effected by surrounding temperature.

Regards,
Rich Roberts



 
 Reply 
 
Ishbel Macdonald
Consultant, Engineering Consultant - NDT
Subsea 7, Norway, Joined Nov 1998, 11

Ishbel Macdonald

Consultant, Engineering Consultant - NDT
Subsea 7,
Norway,
Joined Nov 1998
11
08:56 Mar-23-2001
Re: Has anyone heard of a "Laser Based" temperature measuring devise?
Rich

I know that the classification chaps at DNV are now using a laser based thermometer system for looking for hot spots in engine rooms. I managed to find a web page that includes info on a range of systems including one for up to 1400 deg F. Hope this helps.

http://www.detection.com/laserscan/stnew.html

Ishbel Macdonald
NDT Specialist
DNV


 
 Reply 
 
Mark Badrick
Mark Badrick
01:09 Mar-24-2001
Re: Has anyone heard of a "Laser Based" temperature measuring devise?
Richard,

The radiant heat will not be the only problem encountered when trying to measure furnace tube temperatures. I had a paper published in Inspectioneering Journal Jan/Feb 1998 which highlighted several problems encountered while measuring tube temps. We use thermal imagers and a laser based instrument manufactured by Quantum, but I still believe that real accuracy is still not possible (I know I will be corrected, particularly by the many manufacturers out there). If you want to contact me I can give my views in more detail if you wish

Regards

Mark


: Dear Colleagues,
.
: Has anyone heard of a “Laser Based” system capable of measuring temperature of tube surfaces with temperatures around 1000F? I know that there are several Infrared (IR) devises out there but the problem we have found with them is that the radiant heat severely sacrifices the results. I am looking for a system that is not effected by surrounding temperature.
.
: Regards,
: Rich Roberts
.



 
 Reply 
 

Product Spotlight

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

AMIGO2

TSC Amigo2 - ACFM technology has developed a solid reputation for accurately detecting and sizing
...
surface-breaking cracks through paint and coatings. As the industry demands increased performance in speed, signal quality, and portability, it’s time for an evolution. It’s time for Amigo2.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window