where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

326 views
Classified Ads
Steven Johnson
Consultant
USA, Joined Mar 2004, 16

Steven Johnson

Consultant
USA,
Joined Mar 2004
16
08:26 May-20-2004
For Sale RADIOLOGICAL SURVEY METER

Detects dosage rates from 1 to 500. roentgens/hr wit +- 15% accuracy · Detects both Gamma AND Beta radiation · Zero Adjust Knob · Analog screen range 0-5 roentgens/hr (r/hr is multiplied by the appropriate range scale as selected with range switch) · Selector Switch Settings: Circuit check, Off, Zero (calibrate), X1 (0-5 r/hr), X10 (0-50 r/hr) X100 (0-500 r/hr) · · Ruggedized, Sealed meter is watertight, and resists shock and vibration damage. · · Operates on standard D-Cell batteries (not included) · Operates for over 150 hours continuous, much longer if used intermittently · Manual and original storage box included · These units are in "factory fresh" unused condition. Unlike most of the other Gamma detectors you'll see, these units are NOT stamped with an "R" on the top of the case, which indicates that they are "refurbs". These are NOT refurbs. These units are unused, and as such, we assume them to be working, however, we do not warrant their functionality, accuracy or performance in a gamma or beta environment or otherwise. In the unlikely event that a maintenance issue would occur, the manual has a rather extensive troubleshooting and corrective maintenance section, including repair and replacement of resistors, diodes, etc. We accept credit cards a thru PayPal


 
 

Product Spotlight

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

HD-CR 35 NDT Computed Radiography System

Portable high-resolution CR scanner for all radiography applications - weld testing, profile images
...
and aerospace. No matter what type of radiographic testing you are performing, the unique TreFoc Technology of the HD-CR 35 NDT imaging plate scanner always guarantees the highest image quality.
>

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
...
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window