where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

418 views
Classified Ads
Alisa Newman
Alisa Newman
04:39 Oct-03-2004
Used Radioactive Projector for SALE

Dear Sir,

We are pleased to introduce ourselves as one of the reputed trading house in NY, USA specialize in refurbished NDT equipments. We offer wide range of NDT equipments used in various applications.

We have the following machine in our stock :

ITEM : RADIOACTIVE PROJECTOR
TYPE : 660
BRAND : AEA
MODEL : SENTINEL
STOCK LOCATION : SOUTH AFRICA
SPECIFICATION : ENCLOSED
MAXIMUM ISOTOPE CARRIES : 100
THIRD PARTY CERTIFICATION : POSSIBLE (AT BUYER'S COST)
PRICE : USD 3100/camera
NO. OF PROJECTORS AVAILABLE : 2 NOS.
Validity : September 30, 2004
Picture : Enclosed


Looking forward to receive your interest in the above said machine.

Kind regards

Alisa Joseph
Estrada International
Add : Suite 512, 1122 Broadway
New York, NY-10010,
United States of America
Tel/Fax : 001-206-8880345
Email : estrada@fastmail.fm
Log on : www.estrada.20m.com



 
 

Product Spotlight

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

MANTIS

MANTIS is a compact, powerful and affordable flaw detector (16:64PR), dedicated to field operators
...
. This portable equipment offers standard (electronic-, sector-, compound scan, conventional UT for pulse-echo, dual array and TOFD inspections), and advanced phased-array (real-time TFM -Total Focusing Method). MANTIS benefits from the same intuitive and user-friendly interface (CAPTURE) than Gekko for easier inspections.
>

VeeScan AirCraft Wheel Inspection

The VEESCAN offers maximum flexibility, has a proven mechanical design and records of breakdown-fr
...
ee operation of over 365 days. Appealing to companies in the Aerospace industry, the VEESCAN is ideal for all wheel-testing environments. With a wide selection of probes, the VeeScan allows your wheel testing facility the flexibility to select the most compatible configurations with their workload.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window