where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

GE Inspection Technologies
Inspection Technologies, a business of the Baker Hughes, a GE company (BHGE IT), is one of the world's leading suppliers of nondestructive testin ...
168 views
Technical Discussions
Brian Younce
Brian Younce
05:08 Mar-29-2001
International NDT Contract Facilities

NDT Folks,
I am trying to find potential NDT contract facilities in the following countries: Germany, Austria, and Italy. More specifically I am trying to locate companies that can provide certified ultrasonic technicians, which can be deployed within their country. It would be beneficial for the companies to have experience in performing field inspections on aircraft.
The approximate length of this contract would be in the neighborhood of 10-12 months, and require one overnight trip a week. So the ultrasonic technician must have the ability to travel with inspection equipment, and have the portability of performing "on-wing" tests. If you provide information please include a means of contact. Thank you.

Regards,
Brian M. Younce
Hartzell Propeller Inc.
Phone: 937.778.4236
Fax: 937.778.4271
Email: byounce@hartzellprop.com


    
 
 Reply 
 

Product Spotlight

FlexoFORM™

The FlexoFORM™ solution integrates flexible phased array probe technology in a scanner to solv
...
e the challenges that come with inspecting pipe elbows. When combined with a water column, this solution can be used to collect easy-to-interpret data on elbows with diameters ranging from 4.5 in. OD up to flat and offers many benefits.
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window