where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

360 views
Classified Ads
Juan J Amado
Engineering, Inspection
Arco Industrial, S.A., Panama, Joined Nov 2001, 44

Juan J Amado

Engineering, Inspection
Arco Industrial, S.A.,
Panama,
Joined Nov 2001
44
05:03 Jan-17-2005
Cursos de NDT

Estimados colegas y amigos interesados en el campo de las pruebas no-destructivas:

Reciban ante todo un cordial saludo, y nuestros deseos de que en este nuevo año logren exitosamente todas sus metas.

Nuestra empresa, Fotexsa, S.A. a través de su Centro de Entrenamiento Técnico Industrial esta ofreciendo cursos en temas de ensayos no destructivos para personas de habla hispana. El primero de estos será el de Radiografía Nivel I ofrecido de Marzo 28 a Abril 1, seguido de Radiografía Nivel II, ofrecido de Abril 4 a Abril 8.

No es nuestro interés llenar el forum con propagandas por lo que si desean más información con mucho gusto le responderemos al correo electrónico cetipanama@cwpanama.net , y adicionalmente pueden visitar nuestro sitio
web: www.fotexsa.com en el cual podrán encontrar toda la información.

Atentamente,
Juan J. Amado


 
 

Product Spotlight

MANTIS

MANTIS is a compact, powerful and affordable flaw detector (16:64PR), dedicated to field operators
...
. This portable equipment offers standard (electronic-, sector-, compound scan, conventional UT for pulse-echo, dual array and TOFD inspections), and advanced phased-array (real-time TFM -Total Focusing Method). MANTIS benefits from the same intuitive and user-friendly interface (CAPTURE) than Gekko for easier inspections.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Customized Probes and Transducers

With a strong development department and our own piezocomposite production, we accompany you from th
...
e first product idea to serial production. Our scientists are continuously researching new methods in the field of ultrasonic measurement technology. The progress achieved enables us to offer you optimal solutions.
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window