where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
357 views
Technical Discussions
Massimiliano Pau
Teacher, -
Univ. of Cagliari, Dept. of Mechanical Engineering, Italy, Joined Sep 2002, 25

Massimiliano Pau

Teacher, -
Univ. of Cagliari, Dept. of Mechanical Engineering,
Italy,
Joined Sep 2002
25
05:46 Jul-25-1998
Dynamic tests of wheel-rail contact

In your opinion would it be possible to perform
an ultrasonic test putting an EMAT transducer
in a rail, to evaluate contact conditions while
a train rolls over it?

Massimiliano Pau


 
 Reply 
 
Peter Neumann
Peter Neumann
03:13 Aug-22-1998
Re: Dynamic tests of wheel-rail contact
: In your opinion would it be possible to perform
: an ultrasonic test putting an EMAT transducer
: in a rail, to evaluate contact conditions while
: a train rolls over it?

: Massimiliano Pau

Yes, we have product to check the surface of the wheel.
Please ask our sales-office at Vossloh-Rail-System , Erkelenz

P. Neumann



 
 Reply 
 

Product Spotlight

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

PROlineTOP Plug & Play Ultrasonic inspection device

As Plug & Play solution it units all control and operation elements in a small housing and therefo
...
re replaces the typical control cabinet...
>

XRHRobotStar

In high volume industries like automotive the requirement for a hundred percent X-ray inspection c
...
reates a bottleneck in the production. The XRHRobotStar is a fully Automated Defect Recognition (ADR) capable robot-system that allows an ultra-fast in-line inspection.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window