where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

255 views
Classified Ads
Jawed Ahsan
Jawed Ahsan
01:46 Jul-24-2007
NDT Equipment required for a Fertilizer Plant

We have dismantled a Fertilizer Plant in Nederland and rebuilding it in Pakistan. We need the following equipment. Competitive quotes shall be highly appreciated.

UT Thickness Gauge
Surface Profile Gauge ( For sand Blasting)
Comparator ( For sand Blasting)
Humidifier
UT Flaw detector
Hardness Tester ( Preferably Equotip)
Alloy Analyzer ( X-met 3000 etc)
Vibration Analyzer ( Preferably CSI)
MPI equipment
Densitometer
Film Viewer
Holiday Detector
Elcometer

Please send your quotes at javed.ahsan@fatima-group.com

Warm Regards

Jawed Ahsan
Section Head Inspection




    
 
 

Product Spotlight

Magnetic X-Ray Pipeline Crawler

Zhong Yi brand pipeline crawler is magnetic/micro-video controlled crawler with DC X ray unit inst
...
alled for checking welding of pipeline. Move steadily inside the pipeline 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometers and provide the efficient inspection of the pipeline.
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

X-ray CT aids research into defect formation in AM parts

X-ray CT is used to research how additive manufacturing process parameters influence defect format
...
ion in AM parts.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window