where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Eddyfi
Eddyfi Technologies provide the most advanced NDT technologies in the world, helping OEMs, asset owners and service companies enhance productivit ...
841 views
Classified Ads
James Bayliss
NDT Inspector, - -
Independent Integrity Inspection Limited, United Kingdom, Joined Jul 2007, 9

James Bayliss

NDT Inspector, - -
Independent Integrity Inspection Limited,
United Kingdom,
Joined Jul 2007
9
06:03 Aug-28-2007
Surplus NDT equipment

We have the following Non Destructive Testing equipment surplus to our requirements:-

Panametrics EPOCH III flaw detectors

Andrex Smart 225 type 593 X-Ray set
Balteau Sonatest 300kv panoramic X-Ray set
Hydrobull X-Ray Stands
Agfa Processor Structurex NDT-E
Various radiation monitors
Various film viewers
Densitometers
Various sized cassettes (flexible and rigid)

Hocking Phasec 1.1 Eddy current set

Ardrox Post-emulsifiable penetrant line with storm cabinet and drying oven

Magnaflux P920 110/240 volt power packs
Emcol 1000 amps power packs
Magnaflux 110v electromagnetic Yokes

Equotip hardness tester

If you require any further information or photographs, please contact me.

Regards


 
 

Product Spotlight

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window