where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

TecScan Systems
We offer a complete line of NDT scanners, Immersion Tanks & Gantry systems which incorporate Ultrasonic, Phased Array & Eddy Current technologies.

330 views
Technical Discussions
Mary Owens
Mary Owens
08:26 Apr-18-2001
NDT Processor Service

ImmageTech, Inc. was founded on the principle of quality service and the principle of quality products.

We strive to treat you and your customers as our own family. Located in the Southeastern United States, ImmageTech provides in house training facilities that detail NDT Processing equipment and compliment our technical service department.

Our technicians are highly trained, both by the manufacturers and by our in house support team. We strive to develop long term relationships with our customers by providing the best available solutions in training and technical service.

Processor service and
Preventive maintenance
¨ Industrial X-ray Processor Repair

¨ NDT Processor Preventative Maintenance

¨ Personal Tech Support

¨ Customer Service

¨ Service on Feeders, Processors & Silver Recovery Units

¨ Installation of Feeders, processors and silver recovery units

¨ Bench Repair

¨ On site/ Off site Service

¨ ExchangeProgram

¨ Refurbish Equipment





    
 
 

Product Spotlight

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

NEW! The PragmaPro Instrument Platform

The PragmaPro is based on a modular cartridge technology and supports various NDT instrument modal
...
ities such as UT, PAUT, ECT and many more. This new platform is based on a machined, powder-coated aluminum frame for shock-proofness, best sealing qualities and maximum heat dissipation. This is practical to extend the outdoor temperature range and/or to extend the power injected in the transducers. The PragmaPro is aiming at a very wide range of applications, such as weld scanning, corrosion mapping and composite testing.
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

Trade-In Offer

We are offering our existing clients trade-in against Wavemaker® G3 systems, Standard (Blue) inflat
...
able rings and modules for excellent deals on the latest Wavemaker® G4mini system.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window
s