where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
192 views
Classified Ads
Shirish Vagal
NDT Inspector
Engineering Inspection Services, India, Joined Jul 2007, 1

Shirish Vagal

NDT Inspector
Engineering Inspection Services,
India,
Joined Jul 2007
1
01:41 Apr-28-2008
NDT Courses

Schedule of our next ASNT NDT Level I / II courses (Venue- Mumbai)
1) EDDY CURRENT: 27th May 2008 to 31st May 2008
2) ULTRASONIC: 1st June 2008 to 5th June 2008
3) MAGNETIC PARTICLE: 6th June 2008 to 8th June 2008
4) LIQUID PENETRANT: 9th June 2008 to 11th June 2008
Contact Shirish Vagal - svagal@smartpowerusa.com


    
 
 

Product Spotlight

EKOSCAN Phased Array

In order to always fit your needs, EKOSCAN can manufacture any type of UT transducer, either convent
...
ional or Phased Array. As an ISO 9001: 2015 certified company, EKOSCAN is extremely careful as far a material selection and manufacturing processes are concerned. Our probes guarantee our customers the benefits of latest innovations regarding piezo-composite, backing, impedance adaptation layer, etc. Specific probes for hostile environment: high temperature, high pressure, corrosive environment,etc. Specific probes designed to fit your specific application: optimization of every parameter to guarantee you the best detection.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Webinar: A better way to inspect for surface and sub-surface cracking

Zetec to host webinar November 7 on a better way to inspect for surface and sub-surface cracking. In
...
this webinar, we will introduce a better method that offers industry-leading portability and flexibility, while delivering exceptional flaw detection. The webinar will review and demonstrate how this solution can be applied across numerous inspection applications. Register today!
>

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window