The Largest Open Access Portal of Nondestructive Testing (NDT)

184 views Classified Ads Csaba Hollo Csaba Hollo 01:54 Nov-20-2008 HF Ultrasonic Transducer - FS Panametrics high frequency contact transducer Model V2113. 225 MHz, 3 mm diameter with integral 2.5 usec fused silica delay line in a right angle microdot package. Other frequencies available. E-mail me if interested.                 Translate  Close   Product Spotlight Conformable wedge transducer StandIMASONIC SAS The conformability is obtained with a flexible membrane filled with water between the transducer and ... the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation. > TVC awarded UKAS accreditation StandThe Validation Centre (TVC) Ltd TVC are delighted to finally announce we have been awarded UKAS accreditation for our calibration ... laboratory. Laboratory accreditation to ISO/IEC 17025:2005 enables us to conduct the Electrical Verification of Ultrasonic Flaw Detection Equipment to BS EN 12668-1:2010. It has taken many months of hard work and we want to thank our staff for all their efforts during this massive undertaking. > 2 Showcases4 Videos Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF StandIDEKO S.Coop The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f ... or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n > 3 Showcases NEW! The PragmaPro Instrument Platform StandPRAGMA The PragmaPro is based on a modular cartridge technology and supports various NDT instrument modal ... ities such as UT, PAUT, ECT and many more. This new platform is based on a machined, powder-coated aluminum frame for shock-proofness, best sealing qualities and maximum heat dissipation. This is practical to extend the outdoor temperature range and/or to extend the power injected in the transducers. The PragmaPro is aiming at a very wide range of applications, such as weld scanning, corrosion mapping and composite testing. > 5 Showcases more Showcases Share... Home Exhibition Archive Forum Jobs MyNDT Network Events Directory NDT A-Z Advertise Privacy Policy Contact About © NDT.net - Where expertise comes together. The Largest Open Access Portal of Nondestructive Testing (NDT)- since 1996 We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info Accept top this is debug window s