where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Controle Mesure Systemes
Contrôle Mesure Systèmes designs, develops and manufactures nearly 30 years a complete NDT range of products in eddy current and ultrasonic testing methods.

518 views
Technical Discussions
PRADEEP GARG
PRADEEP GARG
05:32 May-04-2001
Requirement of Instruments

Dear Sir,

We looking for an instrument which can detect the clogging of undrground pipe line full with liquid. The instrument should be capable of scanning the undr ground pipe line(without digging) with respect to its diameter, pressure and other related data.We have been told that intellegent pig can do this.

If any one manufacture such instrument meeting the above requirement, please forward relevant details along with prices at our email adresss. The required information may be marked to the attention of Mr. Pradeep Garg.

Thanks N Regards

Pradeep Garg
APT


    
 
 Reply 
 
Jim Knowles
Jim Knowles
00:44 May-04-2001
Re: Requirement of Instruments
: Dear Sir,
:
: We looking for an instrument which can detect the clogging of undrground pipe line full with liquid. The instrument should be capable of scanning the undr ground pipe line(without digging) with respect to its diameter, pressure and other related data.We have been told that intellegent pig can do this.
:
: If any one manufacture such instrument meeting the above requirement, please forward relevant details along with prices at our email adresss. The required information may be marked to the attention of Mr. Pradeep Garg.
:
: Thanks N Regards
:
: Pradeep Garg
: APT
.
Have you thought of ground seeking radar technique looking for solid blockages.
Also we have camera systems available for forward or side viewing, either hand driven or motorised crawler type vehicles, this is dependant on pipe bore size we concentrate on the smaller sizes 15.0 mm to 100.0mm bore capable of 3D bends.
Jim Knowles
C S Products Testing Equipment Ltd.


    
 
 Reply 
 
Delbert Curtis
Delbert Curtis
00:31 May-09-2002
Request ground seeking radar
: : Dear Sir,
: :
: : We looking for an instrument which can detect things in the ground.




    
 
 Reply 
 
Jim Knowles
Jim Knowles
00:13 May-10-2002
Re: Request ground seeking radar
: : : Dear Sir,
: : :
: : : We looking for an instrument which can detect things in the ground.
.There are many companies around that can provide such systems.
For example:
ERA U.K www.era.co.uk
GEOVISION www.geovision.com
Geophysical www.geophysical.com
who manufacture a whole range of equipment for particular applications




    
 
 Reply 
 

Product Spotlight

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

High-end Ultrasonic Flaw Detector with 32:128PR PAUT and 2-ch TOFD: SyncScan 2

SIUI’s newly launched SyncScan 2, is a high-end ultrasonic flaw detector with 32:128PR PAUT and
...
2-ch TOFD, which can maximize your efficiency for PA and TOFD. ● Support PA/TOFD/UT ● 32-ch PA is more suitable for inspection on extra-thick wall and high-attenuation material. ● 32-ch PA and 2-ch TOFD work simultaneously. ● Support PR mode for corrosion inspection.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window