where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Hillger NDT GmbH
was founded in 1984 and develops special ultrasonic imaging systems for high-tech materials.

382 views
Job Offers
S. Daniel
Consultant, -
Scanstar Inspection Technology Private Limited, India, Joined Dec 2008, 7

S. Daniel

Consultant, -
Scanstar Inspection Technology Private Limited,
India,
Joined Dec 2008
7
05:36 Feb-05-2009
UT, MT, PT & RT ASNT Level II

Posted by SCANSTAR NDT SERVICES
Job Location: Overseas

ASNT LEVEL II UT, MT, PT & RT Technicans with Minimum 2 Years working Experience Required.

Candidates Shall have Welding Ultrasonic Flaw detection.

If you have the above mentioned Experience, send your resumes to this Mail ID: scanstar_2001@yahoo.com.

for SCANSTAR NDT SERVICES

S. Daniel
Managing Partner

 
 

Product Spotlight

Wireless TOFD scanner

Quick, accurate and highly reproducible welds testing. The System operates wirelessly and is compat
...
ible with any type of Windows based Laptop, Desktop or Tablet.
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

PAUT Probes

Typical Phased Array probes have frequencies between 1MHz and 20MHz and the number of wafers is 10
...
to 128. M2 Electronics offers customers conventionally ultrasound probes and the ability to provide high-precision Phased Array Ultrasound Probes of up to 256 wafers. We can also customize the probe for our customers to meet the specific application requirements of the user.
>

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window