For the past 11 (Eleven) years of my working experience as Equipment Site Supervisor/ QC Inspector/QC Supervisor, I had gained experience & Knowledge on Quality Awareness. Performing Hold, Witness & Surveillance inspections based on standard requirements and other related presentations to justify the clients specifications and approvals.
My areas of expertise are Preservation, Installation, Inspection& Verification of Rotary Equipment, Static Equipment, Equipment Internals, Air fin coolers, Surface condensers etc.
The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
An article in “Composites World Magazine” showcases Non
Destructive Testing of aero-structures
with Laser Shearography.
Over the years Dantec Dynamics has supplied many solutions for the
aerospace industry. Referring to specific customer projects
several of these cases are examined to outline the advantages of
using Laser Shearography for automated defect detection.