where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

582 views
Career Discussions
santosh kumar
santosh kumar
08:20 Feb-13-2009
accp level iii/asnt iii

what is the basic difference between asnt level iii and accp level iii .
does accp level iii/asnt level iii has more importance ?

Which one is better to pursue afte 2 years of expereince in ndt (rt ut mpt ,lpt) ?

does both certifications holder does the same job or job profile differs ?


santosh kumar

    
 
 
Nigel Armstrong
Engineering, - Specialist services
United Kingdom, Joined Oct 2000, 1094

Nigel Armstrong

Engineering, - Specialist services
United Kingdom,
Joined Oct 2000
1094
13:24 Feb-13-2009
Re: accp level iii/asnt iii
In Reply to santosh kumar at 08:20 Feb-13-2009 (Opening).

Santosh

Without knowing your educational and career background, after just 2 years NDT experience I would suggest you concentrate on extending your skills as a Level 2. When the time and opportunity are right hopefully you wont have to "shoot-in-the-dark" on such matters, as you will be by then fully aware of your own path and which certification scheme will suit your needs best, though you may also find its all "much of a muchness" with no scheme's merits outshining those of any other scheme.

Good luck in your chosen path

    
 
 

Product Spotlight

Lyft™: Pulsed Eddy Current Reinvented

PEC Reinvented—CUI Programs Redefined Corrosion under insulation (CUI) is possibly the greatest u
...
nresolved asset integrity problem in the industry. Current methods for measuring wall thickness with liftoff, without removing insulation, all have severe limitations. Eddyfi introduces Lyft — a reinvented, high-performance pulsed eddy current (PEC) solution. The patent- pending system features a state-of-the-art portable instrument, real- time C-scan imaging, fast data acquisition with grid-mapping and dynamic scanning modes, and flexibility with long cables. It can also scan through thick metal and insulation, as well as aluminum, stainless steel, and galvanized steel weather jackets. Who else but Eddyfi to reinvent an eddy current technique and redefine CUI programs. Got Lyft?
>

NEOS III

NEOS III is Logos Imagings lightest DR system. With a built in \r\nbattery and internal wireless c
...
ommunication, the NEOS III is perfect \r\nfor users that want to quickly assess an item.
>

Ultrasonic Flaw Detector & Thickness Gauge: Smartor

SIUI’s newly launched Smartor is a combination of ultrasonic testing and ultrasonic thickness me
...
asurement. ●IP 66 ●Compact size: 198 (W)* 128 (H) *520 (D) mm ●0.9kg only with battery ●5.7" LCD with high resolution 640×480 pixels ●One-hand operation ●Multiple conventional UT functions ●Smart Test Wizard ●Weld Simulation
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window