where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
704 views
Technical Discussions
Duygu Demirci
NDT Inspector, Quality Assurance Engineer
PFW Aerospace Industry, Turkey, Joined Sep 2008, 11

Duygu Demirci

NDT Inspector, Quality Assurance Engineer
PFW Aerospace Industry,
Turkey,
Joined Sep 2008
11
11:27 Feb-13-2009
Colour-Blindness Test

Good Afternoon Dear All,

Does anyone has handbook of ISHARA'S Tests for colour-blindness in english?
I have one but it is in spanish or italian language. It is such a kind of small discription book as 9 pages.

If you have that could you send me please?
Thank you.

 
 Reply 
 
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 856

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
856
18:04 Feb-13-2009
Re: Colour-Blindness Test
In Reply to Duygu Demirci at 11:27 Feb-13-2009 (Opening).

Duygu,

I don't know about Turkey, but here our Optometrist knows of the test and I'm pretty sure also in your country they could provide you with the information you need in your language.

 
 Reply 
 
Mr.Green-Saipem
Mr.Green-Saipem
18:18 Feb-13-2009
Re: Colour-Blindness Test
In Reply to Duygu Demirci at 11:27 Feb-13-2009 (Opening).

http://www.pdf-search-engine.com/ishihara-test-pdf.html

 
 Reply 
 

Product Spotlight

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window