where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

631 views
Career Discussions
Galil
Galil
20:39 Feb-16-2009
calibration block SO2

I tried to buy the calibration block SO2 can someone know from where I can buy this block

    
 
 
Phil Herman
Phil Herman
21:17 Feb-16-2009
Re: calibration block SO2
In Reply to Galil at 20:39 Feb-16-2009 (Opening).

Galil,
Are you referring to the Calibration Block No. 2 from EN 27963?
Phil

    
 
 
Andrey Bazulin
R & D, -
Scientific Center ECHO+, Russia, Joined Sep 2006, 58

Andrey Bazulin

R & D, -
Scientific Center ECHO+,
Russia,
Joined Sep 2006
58
10:41 Jun-26-2010
Re: calibration block SO2
In Reply to Phil Herman at 21:17 Feb-16-2009 .

Hi

Maybe it is too late but SO-2 block is a Rusian Standard GOST 14782 block.
So a lot of Russian companies can sell it.

Is there else one block with the same designation?

    
 
 

Product Spotlight

I&T Nardoni

NDT, RESEARCH AND DEVELOPMENT OF NEW METHODOLOGY, TRAINING CENTER I&T NARDON INSTITUTE was idiated
...
in 1988 by Giuseppe Nardoni, now president and owner of the company, based on his multi-annual and international experience in the field of NDT.
>

AMIGO2

TSC Amigo2 - ACFM technology has developed a solid reputation for accurately detecting and sizing
...
surface-breaking cracks through paint and coatings. As the industry demands increased performance in speed, signal quality, and portability, it’s time for an evolution. It’s time for Amigo2.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window