CSWIP AUT(Pipewizard)/Omniscan -Phased Array /AWS Senior Welding/asnt Level III Inspector
Job Location: Worldwide
I am S.R.G.PRABHU, an Indian National worked in Europe, Asia and West Africa.
I am about to leave on 12th Feb to Angola offshore to work as TOTAL CLIENT AUT SPECIALIST for their offshore pipe lay project till 30th March. I just came back from Persian Gulf for a pipe lay job for STATOIL HYDRO -NORWAY as client AUT inspector FROM Dec 07 to Feb 01, 2009. Previously I was working for ENI GAS in an offshore platform in Libya as Inspection supervisor. I completed my contract with QATARGAS II, offshore Qatar for 42 inch condensate project since April 07 TO Oct 07 as client LEAD inspector( AUT SURVEYOR). Last year I was in an offshore pipe lay project in Persian gulf for Statoil -Norway as Client AUT surveyor in a Pipe lay barge. Previously I worked in Sakhalin island for RGS-Russian German consortium which was the sole inspection authority for Sakhalin II phase II projects. I was a third party AUT inspector onboard SEMAC-I, overseeing Saipem techs every day work from July1005 to Nov2005.
From 2003 June to 2004 March, I was a SHELLDEEPWATER NIGERIA (SNEPCO) a division of DEEPWATER SHELL-HOUSTON client AUT/ SENIOR WELDING inspector for their deepwater pipe lay project, 'Bonga' in Nigeria and Paris-France. From 2001 to 2003 I was a Exxon Mobil Nigeria client inspector offshore.
I have worked in France, Nigeria, Oman, Qatar, Angola, Saudi, China and India and also Persian gulf. My experience includes Refineries, Petrochemical, Desalinations, Pipelines on and offshore, offshore structures including risers and deepwater J-lay. I am flexible, team man and constantly learning to improve my quality of work.
I am CSWIP AUT PHASED ARRAY DATA INTERPRETER (as per EN 473) from TWI north- Middles borough, ASNT LEVEL III in RT and UT, Senior welding inspector from AWS, and OLUMPUS OMNISCAN PHASED ARRY MANUAL UT trained and certified as Level II with my offshore survival(BOSIET-OPITO CERTIFIED), and H2S both valid currently and till April 2012.
I am looking forward hearing from you soon.
ASNT LEVEL III -RT,UT.
CSWIP-AUT PHASED ARRAY DATA INTERPRETER LEVEL II
OLYMPUS OMNISCAN MANUAL PHASED ARRY LEVEL II
Telephone:0091 44 249 80795 91960081598
No-3, Second street, Maris avenue, Collector's office road,
Tamilnadu state India
ISAFE3 Intrinsically Safe Sensor System
ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications.
The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation.
ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
SONOAIR - air-coupled Phased Array Ultrasonic Inspection System
For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
the scanning area and the system settings should be flexibly adapted to the test task and the material.
These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.