where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1433 views
Technical Discussions
hurschy
NDT Inspector, - - - Prüfaufsicht
Otto Seidel GmbH, Germany, Joined Oct 2008, 7

hurschy

NDT Inspector, - - - Prüfaufsicht
Otto Seidel GmbH,
Germany,
Joined Oct 2008
7
15:01 Feb-17-2009
MT Prüfung

Hallo liebe Leute
Ich würde von euch gerne wissen,wie lang braucht man Normgerecht für eine MT-Prüfung von 1mx1m Blech.
Gegeben sind Handjoch Polabstand 150mm
Bewertung nach DIN EN 5817 B
Bitte einmal für schwarz-weiss und einmal für fluoreszierende Prüfung.
Vielen Dank im voraus.
Kind regards
hurschy

 
 Reply 
 
hurschy
NDT Inspector, - - - Prüfaufsicht
Otto Seidel GmbH, Germany, Joined Oct 2008, 7

hurschy

NDT Inspector, - - - Prüfaufsicht
Otto Seidel GmbH,
Germany,
Joined Oct 2008
7
16:32 Feb-17-2009
Re: MT Prüfung
In Reply to hurschy at 15:01 Feb-17-2009 (Opening).

Sorry die Bewertung erfolgt natürlich nicht nach 5817 mein Fehler

 
 Reply 
 
ezio
Other, Retired ex Laboratory Technical Manager
OMECO Research Centre, Italy, Joined Sep 2008, 278

ezio

Other, Retired ex Laboratory Technical Manager
OMECO Research Centre,
Italy,
Joined Sep 2008
278
17:25 Feb-19-2009
Re: MT Prüfung
In Reply to hurschy at 16:32 Feb-17-2009 .

Die Frage ist schwer zu beantworten falls du nicht den Zweck deiner Frage stellst

 
 Reply 
 
hurschy
NDT Inspector, - - - Prüfaufsicht
Otto Seidel GmbH, Germany, Joined Oct 2008, 7

hurschy

NDT Inspector, - - - Prüfaufsicht
Otto Seidel GmbH,
Germany,
Joined Oct 2008
7
19:02 Feb-19-2009
Re: MT Prüfung
In Reply to ezio at 17:25 Feb-19-2009 .

Na klar ist es ich habe auch nur folgende Formel nicht mehr gefunden.
A=0,5xdx(d-50)
fürs Joch.
Vielen Dank trotzdem

Kind regards
hurschy

 
 Reply 
 

Product Spotlight

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

Magnetic X-Ray Pipeline Crawler 6''-60''

Suitable to work in 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometer
...
s and provide the efficient inspection of the pipeline.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window