where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
546 views
Technical Discussions
Jane Guo
Jane Guo
03:41 May-23-2001
multi-position arm & pipe-o-Crawler

We are looking for
pipeline-o-crawler which can be used on 16¡¨~20¡¨£¬22¡¨-24¡¨32¡¨-36¡¨40¡¨-44¡¨steel helix external pipeline,misregistration<10mm per veer and speed between 0-1m(can be adjustable).
multi-position arm
max inspection height:3.5m(can be adjustable)
X-ray tube:225Kv
Number of modular section:2




    
 
 Reply 
 
Ian Huff
Ian Huff
04:21 May-23-2001
Re: multi-position arm & pipe-o-Crawler
: We are looking for
: pipeline-o-crawler which can be used on 16¡¨~20¡¨£¬22¡¨-24¡¨32¡¨-36¡¨40¡¨-44¡¨steel helix external pipeline,misregistration<10mm per veer and speed between 0-1m(can be adjustable).
: multi-position arm
: max inspection height:3.5m(can be adjustable)
: X-ray tube:225Kv
: Number of modular section:2
:
.Refer to Oceaneering web site re. Solus Schall pipeline crawlers. Please e-mail me with more explicit
information.
Ian Huff
Pipeline Inspection Manager
Asia Pacific



    
 
 Reply 
 
Christoph Schnitger ( TCP Prüftechnik GmbH )
Christoph Schnitger ( TCP Prüftechnik GmbH )
05:30 May-23-2001
Re: multi-position arm & pipe-o-Crawler
Dear Jane,

you will receive an official offer for an pipeline
crawler from my side !!

If you are looking for new or used equipment in the
following methods ( RT ; UT ; MPT or PT ) i am sure
i can help you.

Do not hesitate to contact us !!

C.Schnitger


    
 
 Reply 
 

Product Spotlight

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

iProbe - USB Phased Array Probe

Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas
...
ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
>

Webinar: A better way to inspect for surface and sub-surface cracking

Zetec to host webinar November 7 on a better way to inspect for surface and sub-surface cracking. In
...
this webinar, we will introduce a better method that offers industry-leading portability and flexibility, while delivering exceptional flaw detection. The webinar will review and demonstrate how this solution can be applied across numerous inspection applications. Register today!
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window