where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1246 views
Technical Discussions
Jaga
Jaga
03:24 Feb-19-2009
Does Phasor XS(Phase Array) code compliace to ASME CC2235-9

Dear All,

Does Phasor XS code compliance to CC2235-9?As far I concern,this unit incompatible to execute sector scan(B-scan) with encoder to record out the scan.In short,we can't acquire recordable executed scan(side view) or even can't record defect size length.And in order to execute defect sizing,we need to do it manually by using manual UT probe. Does this attributes can comply ASME CC2235-9 in lieu of radigraphy?Please advice and correct me if I'm wrong.Thanks.

 
 Reply 
 
Manfred Richter
Consultant,
Richter & Tomasi Ltd., Brazil, Joined Jan 2008, 32

Manfred Richter

Consultant,
Richter & Tomasi Ltd.,
Brazil,
Joined Jan 2008
32
14:47 Feb-20-2009
Re: Does Phasor XS(Phase Array) code compliace to ASME CC2235-9
In Reply to Jaga at 03:24 Feb-19-2009 (Opening).

Jaga,
recently GE upgrade the phasor, and it possible to acquire encoded data now . The new ones was demonstrated for our company.

 
 Reply 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 280

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
280
23:17 Feb-20-2009
Re: Does Phasor XS(Phase Array) code compliace to ASME CC2235-9
In Reply to Jaga at 03:24 Feb-19-2009 (Opening).

The original Phasor could not meet the requirements and GE quickly became aware of that. they have upgraded now and you should be able to achieve it with the new units. Talk to your GE rep.

Regards

 
 Reply 
 
Jaga
Jaga
03:29 Feb-21-2009
Re: Does Phasor XS(Phase Array) code compliace to ASME CC2235-9
In Reply to John O'Brien at 23:17 Feb-20-2009 .

Dear All,
Thanks for your speedy response.As far I concern,encoded inspection with the Phasor XS is only possible in CScan mode(Top view).The C-Scan is uncorrected and doesn't portray the correct view ,to carry out defect sizing base on the C scan view.Still need to carry out manual sizing by using conventional UT technique.From this findings, I assume the phasor XS still can't comply CC2235-9.Please advice and correct me if I'm wrong. Thanks a lot.

 
 Reply 
 

Product Spotlight

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window