where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1116 views
Career Discussions
Engkus Kusnadi
NDT Inspector, -
PT SEAMLESS PIPE INDONESIA JAYA, Indonesia, Joined Apr 2007, 5

Engkus Kusnadi

NDT Inspector, -
PT SEAMLESS PIPE INDONESIA JAYA,
Indonesia,
Joined Apr 2007
5
05:33 Mar-03-2009
L-III Signature on NDT PCP

Dear all,

Please let me know if any Standard procedures mentioned that " Internal Procedures like PCP (Process Control Procedure) shuold sign or approved by NDT L-III. While in our company doesn't have any L-III personnel.

Regards,

Kusnadie

    
 
 Reply 
 
tj
tj
20:20 Mar-04-2009
Re: L-III Signature on NDT PCP
In Reply to Engkus Kusnadi at 05:33 Mar-03-2009 (Opening).

In most cases NDT is to be performed to a written procedure. In many cases it is not stated who shall approve this procedure. It is often recommended that a level 3 will at least approve the procedure (as with SNT-TC-1A) but in the end it is often up to the manufacturer to decide in their written practice. This is all subject to whichever code is referenced. Do you know which?

    
 
 Reply 
 
Kusnadie
NDT Inspector, -
PT SEAMLESS PIPE INDONESIA JAYA, Indonesia, Joined Apr 2007, 5

Kusnadie

NDT Inspector, -
PT SEAMLESS PIPE INDONESIA JAYA,
Indonesia,
Joined Apr 2007
5
04:53 Mar-05-2009
Re: L-III Signature on NDT PCP
In Reply to tj at 20:20 Mar-04-2009 .

Dear Franchuk,

Thank you for repply,
About refference just question from me may be other forum participant have some answer.

Regards,
Kusnadie

    
 
 Reply 
 
Karunanithi
Karunanithi
08:16 Mar-05-2009
Re: L-III Signature on NDT PCP
In Reply to Engkus Kusnadi at 05:33 Mar-03-2009 (Opening).

NADCAP Requirement is clearly stated the procedure or first article procedure shall be approved by Level III,
If your organization doesn't have one you may engage external Level III for one time approval.

    
 
 Reply 
 
S S Ananthan
Consultant,
RAA Tech Solutions, India, Joined Jun 2000, 36

S S Ananthan

Consultant,
RAA Tech Solutions,
India,
Joined Jun 2000
36
09:02 Mar-05-2009
Re: L-III Signature on NDT PCP
In Reply to Karunanithi at 08:16 Mar-05-2009 .

Hello,

Regardless of any code requirement, it is always good to have the procedure vetted by a Level III ( internal / external ). So my suggestion is that you get it vetted.

S S Ananthan

    
 
 Reply 
 

Product Spotlight

NEOS III

NEOS III is Logos Imagings lightest DR system. With a built-in battery and internal wireless commu
...
nication, the NEOS III is perfect for users that want to quickly assess an item.
>

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

PROlineTOP Plug & Play Ultrasonic inspection device

As Plug & Play solution it units all control and operation elements in a small housing and therefo
...
re replaces the typical control cabinet...
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window