where expertise comes together - since 1996

Web's Largest Portal of Nondestructive Testing (NDT)
Open Access Database (Conference Proceedings, Articles, News), Exhibition, Forum, Network

All Forum Boards
Technical Discussions
Career Discussions
Job Offers
Job Seeks
Classified Ads >
Freelance Eddy Current Tubing Examination
About NDT.net
Articles & News

277 views
12:03 Mar-12-2009

Ricky Ong

Director, -
ASNT,
Singapore,
Joined Aug 2008
12
Freelance Eddy Current Tubing Examination

Freelance with ASNT TC 1A ET LII with own Eddy Current Phase Analysis instrument, providing "One Stop Solution" for Tubes Examination by ET including, as follows:-
1) Cleaningby lancing tubes by standard/abrasive/grinding projectile/coiled brushes
2) High pressure water lancing of 6,000 - 10,000 PSI pressure.
3) Plugging defective tubes by cutting one tube end.
4) Retubing of seal weld tube end, expanded tube end or fin fan tube cooler.

If you require such services, please provide us tube material specificationbased on ASME Section II Part B , tube sizes and number of tubes. The test shall perform as per ASME V Article 8 - Appendix I - Eddy Current Examination Method for Installed Nonferrogmagnetic Heat Exchanger.

 


© NDT.net - The Web's Largest Portal of Nondestructive Testing (NDT) ISSN 1435-4934

Open Access Database, |Conference Proceedings| |Articles| |News| |Exhibition| |Forum| |Professional Network|