where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

EXTENDE
EXTENDE, optimize your NDT inspections projects thanks to simulation.
787 views
Technical Discussions
ALI AL_DAWJI
Engineering, Doctor course student
Japan, Joined May 2001, 4

ALI AL_DAWJI

Engineering, Doctor course student
Japan,
Joined May 2001
4
06:28 May-29-2001
The volume of air bubbles

Dear Sir.
I am looking for some information related
to measure and detect the volume of air bubbles,
or voids of air (around 0.5 cubic cm) in an object
using any ultrasonic techniques,
I would be grateful if any one could help me,
by giving suitable information related to this matter.



    
 
 Reply 
 
Dr. Patel
R & D, Consultant to Universities/Industries
Fallon Ultrasonics/McMaster University, Canada, Joined May 2001, 20

Dr. Patel

R & D, Consultant to Universities/Industries
Fallon Ultrasonics/McMaster University,
Canada,
Joined May 2001
20
06:47 May-29-2001
Re: The volume of air bubbles
: Dear Sir.
: I am looking for some information related
: to measure and detect the volume of air bubbles,
: or voids of air (around 0.5 cubic cm) in an object
: using any ultrasonic techniques,
: I would be grateful if any one could help me,
: by giving suitable information related to this matter.
.

We have measured both in glass and liquid using ultrasonic methods and perhaps you can use the method. If you have small sample please send us and we will send you results. If it is in liquid than number of universities have purchased system from us and have a good success. Please contact me

Regards

Dr. Patel



    
 
 Reply 
 
Wieslaw Bicz
Wieslaw Bicz
01:10 May-29-2001
Re: The volume of air bubbles
: Dear Sir.
: I am looking for some information related
: to measure and detect the volume of air bubbles,
: or voids of air (around 0.5 cubic cm) in an object
: using any ultrasonic techniques,
: I would be grateful if any one could help me,
: by giving suitable information related to this matter.
.
For a project with the goal of early detection of breast cancer we are developing a version of our holographic camera, that is able to visualize 3D objects with high resolution.
Using the first version of this holographic camera it could be possible to measure such bubbles (with the assumption, that the amount of them is not very high) with high precision (better than 0.1mm).
It is possible to achieve very good 3D reconstruction of such objects.

If you are interested in cooperation, please contact me (w.bicz@optel.pl)




    
 
 Reply 
 
Tom Nelligan
Engineering,
retired, USA, Joined Nov 1998, 390

Tom Nelligan

Engineering,
retired,
USA,
Joined Nov 1998
390
05:10 May-29-2001
Re: The volume of air bubbles
: I am looking for some information related
: to measure and detect the volume of air bubbles,
: or voids of air (around 0.5 cubic cm) in an object
: using any ultrasonic techniques,

In what sort of material are you trying to detect the bubbles? How long will the sound path be between the transducer and the target bubbles? Are the bubbles of uniformly spherical shape or does the shape vary? To what level of precision do you need to determine bubble size? All of these considerations will have an effect on the feasibility and reliability of ultrasonic detection and sizing. Perhaps you could tell us a bit more about your test conditions.

--Tom Nelligan



    
 
 Reply 
 

Product Spotlight

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

CIVA 2017 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

Silverwing RMS PA - Phased-array corrosion mapping

Eddyfi Technologies integrated two market leading solutions, Silverwing’s RMS and M2M’s instru
...
ments to provide a high-speed, remote access ultrasonic phased-array inspection system with live total focusing method (TFM).
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window