where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1048 views
Career Discussions
KUMAR
KUMAR
08:23 Mar-21-2009
ASNT LEVEL lll BOOKS AND REFERENCES

IAM PREPARING FOR ASNT LEVEL lll EXAMS IN UT AND PT
COULD ANY ONE SUGGEST ME WHERE CAN I GET ONLINE MATERIALS OR WEB SITES
FOR EXAM PREPARATION
I REQUEST YOU ALL TO GIVE ME YOUR VALUABLE SUGGESTIONS
THANK YOU

 
 Reply 
 
S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
13:01 Mar-22-2009
Re: ASNT LEVEL lll BOOKS AND REFERENCES
In Reply to KUMAR at 08:23 Mar-21-2009 (Opening).

Dear Kumar,

At the outset, my best wishes to you for success in the exams. I would strongly urge you to take the refresher course conducted by ISNT Hyderabad Chapter and NGC. As a part of that, several model questions are discussed. www.ndt.net and www.nde-ed.org have some good materials. You could also get the training materials in advance so that when you attend the refresher course, you would have already gone through the material a few times.

With best wishes,

Swamy

 
 Reply 
 
reza
reza
06:20 Jun-01-2009
Re: ASNT LEVEL lll BOOKS AND REFERENCES
In Reply to S.V.Swamy at 13:01 Mar-22-2009 .

Dear Swamy

thanx for your valuable helping and suggestion via comments , i am preparing for asnt level III exam in chenai(india-ISNT) for next year but i have two question:
1)Could you advise me to how study basic? consider Basic exam has many sourses?
2)How can downoad some basic questions?
3)Do you advise me to study all the references?

Thanks and Best Wishes
Reza

 
 Reply 
 
S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
09:42 Jun-02-2009
Re: ASNT LEVEL lll BOOKS AND REFERENCES
In Reply to reza at 06:20 Jun-01-2009 .

I would suggest that you take the help of the ASNT Level III or the institute from where you plan to do the refresher course. ISNT also offers the refresher courses but there are many other players in the field. Each has his own approach. Find out what suits you.

Email me separately if you need more help.

Best wishes.

Swamy

 
 Reply 
 

Product Spotlight

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

HD-CR 35 NDT Computed Radiography System

Portable high-resolution CR scanner for all radiography applications - weld testing, profile images
...
and aerospace. No matter what type of radiographic testing you are performing, the unique TreFoc Technology of the HD-CR 35 NDT imaging plate scanner always guarantees the highest image quality.
>

TraiNDE UT

TraiNDE UT is a virtual tool associated with a signal database which simulates real inspection con
...
ditions for numerous applications (Type A/V1 block, DAC block, welds and plates).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window