where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

- Login

Home Exhibition Archive Forum Jobs Members Events Directory NDT A-Z

446 views

Classified Ads

Borja Lopez
Director
Innerspec Technologies, USA, Joined Jun 2002,

³⁶

Borja Lopez
Director
Innerspec Technologies,
USA,
Joined Jun 2002

³⁶

16:47 Mar-21-2009
Representatives Wanted

Innerspec Technologies from the United States is currently looking for qualified representatives in Europe to sell and support our Ultrasonic EMAT equipment. The candidates should have a strong presence in their markets and very good knowledge of ultrasonic products (both portable and large in-line systems). Previous experience with major brands (e.g. RD Tech, Panametrics) is a plus.

The chosen representatives will liaise with our new regional office in Spain to promote and sell the equipment in their respective regions.

Interested candidates should contact us urgently through www.innerspec.com (Contact Us section).


Translate Close

Product Spotlight
ISAFE3 Intrinsically Safe Sensor System
Stand Vallen-Systeme GmbH
ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>
2 Showcases
Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge
Stand Cygnus Instruments Ltd
The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>
5 Showcases 5 Videos
AIS229 - Multipurpose Real Time System
Stand BALTEAU NDT
Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>
5 Showcases 3 Videos
Eddy Current inspection : RotoETscan Rotating Head
Stand Controle Mesure Systemes
The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>
3 Videos
more Showcases

Share...

Home

Exhibition